Source-backed diagnostic reference

B0104 Code: Meaning & Diagnostic Guide

Sensor Cleaning Air Blower Actuator A Control Relay

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B0104 mean?

  • GENERIC: Sensor Cleaning Air Blower Actuator A Control Relay Source
  • GENERIC: Driver Mirror Adjust Switch Circuit Source

B0104 quick answer

B0104 is a body-system code with conflicting generic descriptions in the supplied references: one identifies a sensor-cleaning air blower actuator control relay, and another identifies a driver mirror adjustment switch circuit. Confirm the meaning for your vehicle before diagnosing or replacing parts.

Is B0104 generic or manufacturer-specific?

B0104 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B0104 works in the vehicle

A diagnostic trouble code (DTC) is a code stored by a vehicle system when it detects a condition it monitors. The references do not agree on what B0104 monitors, so the code alone does not confirm a particular failed component or manufacturer-specific meaning.

B0104 symptoms

Depending on the vehicle-specific definition, a driver mirror adjustment problem or an issue with a sensor-cleaning air blower may be relevant. Neither symptom is established by the supplied evidence, and other symptoms may occur.

Possible causes of B0104

Possible causes depend on which definition applies. A circuit, switch, relay, wiring, connector, or related control issue might be investigated, but the evidence does not confirm any of these as the cause.

How to diagnose B0104

  1. Check the vehicle’s year, make, model, and service information to confirm the exact definition of B0104.
  2. Use a compatible scan tool to read the code, the system that reported it, and any accompanying codes or stored details.
  3. Note any relevant symptoms, such as mirror adjustment or sensor-cleaning blower operation, without assuming they identify the fault.
  4. If service information confirms the affected system, have its connectors, wiring, switch, relay, and related controls checked using the vehicle’s diagnostic procedure.
  5. Recheck for codes after diagnosis or repair to see whether B0104 returns.

How to fix B0104

Do not replace a part based on the code alone. Confirm the vehicle-specific definition and test the relevant circuit before deciding whether a switch, relay, wiring, or another component needs attention. Use a qualified technician if the diagnosis requires specialized equipment or procedures.

Can I drive with B0104?

The supplied evidence does not establish a universal safety risk or whether the vehicle is safe to drive. If the issue affects visibility or another function needed for safe operation, avoid driving until it is assessed; otherwise, follow the vehicle’s warnings and seek vehicle-specific advice.

B0104 frequently asked questions

What does B0104 mean?

The supplied generic references give two different descriptions: a sensor-cleaning air blower actuator control relay and a driver mirror adjustment switch circuit. Check vehicle-specific service information for the applicable meaning.

Does B0104 confirm a failed relay or mirror switch?

No. The code description is not a confirmed component diagnosis, and the supplied references disagree about the system involved.

Can I drive with B0104?

The evidence does not establish a universal answer. Consider whether any affected function compromises safe operation and consult vehicle-specific guidance.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.