Source-backed diagnostic reference

B10381B Code: Meaning & Diagnostic Guide

Igniter 1 for pedestrian protection — resistance too high. The aftermarket listing names the exact code and lists the Audi e-tron GT as compatible with the pedestrian-protection actuator.

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B10381B mean?

  • Audi: Igniter 1 for pedestrian protection — resistance too high. The aftermarket listing names the exact code and lists the Audi e-tron GT as compatible with the pedestrian-protection actuator. Source

B10381B quick answer

B10381B is described in the supplied listing as “Igniter 1 for pedestrian protection — resistance too high.” The code indicates that the system detected higher-than-expected electrical resistance, but it does not by itself confirm which part has failed. The listing associates the code with the Audi e-tron GT; confirm applicability for the specific vehicle using reliable service information.

Is B10381B generic or manufacturer-specific?

B10381B currently has manufacturer-labelled reference definitions for Audi. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B10381B works in the vehicle

“Resistance too high” means the circuit’s measured opposition to electrical current exceeded the system’s expected range. “Igniter 1” refers to a component in the pedestrian-protection system. The code alone does not prove that the igniter is defective or identify the cause.

B10381B symptoms

A warning light or message, or a stored code found during a scan, may be how the issue is noticed. The supplied evidence does not establish particular symptoms, and the system’s function should not be assumed from the code alone.

Possible causes of B10381B

Possible explanations can include an electrical connection or wiring problem, corrosion, or a fault in a circuit component. These are possibilities, not confirmed causes; further diagnosis is needed.

How to diagnose B10381B

  1. Confirm the vehicle’s exact model, year, and equipment, and check whether B10381B applies using appropriate service information.
  2. Use a compatible diagnostic scanner to verify the code and check for related codes; record them before clearing anything.
  3. Have a qualified technician inspect the relevant system and wiring using the vehicle manufacturer’s safety procedures.
  4. Ask the technician to confirm the fault and its cause before replacing parts.

How to fix B10381B

Repair depends on the cause confirmed during diagnosis. Because this code concerns a pedestrian-protection igniter, avoid probing, disconnecting, or attempting to repair its circuit yourself. Have a suitably qualified technician follow the applicable service procedures.

Can I drive with B10381B?

The evidence does not establish whether the vehicle is safe or unsafe to drive. Treat the pedestrian-protection system’s status as unconfirmed, consult the owner’s manual, and arrange prompt professional assessment. Do not rely on the system functioning until it has been checked.

B10381B frequently asked questions

What does B10381B mean?

The supplied description says “Igniter 1 for pedestrian protection — resistance too high.” It reports a circuit condition, not a confirmed failed component.

Does B10381B prove the igniter needs replacement?

No. Wiring, connections, or another circuit issue may also be involved. Diagnosis is needed to identify the cause.

Does this code apply to every Audi?

That is not established by the supplied evidence. An aftermarket listing associates the code with the Audi e-tron GT, but applicability should be checked for the specific vehicle.

Can I keep driving with B10381B?

The evidence does not determine driving safety. Consult the owner’s manual and have the system assessed promptly by a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.