Source-backed diagnostic reference

B10C654 Code: Meaning & Diagnostic Guide

“Running-in regulation — No basic setting.” The exact code and wording appear in a Bentley erWin code list; that confirms the definition, but does not establish Audi-specific applicability or applicability to a 2021+ Audi BEV/PHEV. ([bentleymotors-us.erwin-store.com](https://bentleymotors-us.erwin-store.com/erwin/download.sealed?articleId=168800&utm_source=openai))

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B10C654 mean?

  • GENERIC: “Running-in regulation — No basic setting.” The exact code and wording appear in a Bentley erWin code list; that confirms the definition, but does not establish Audi-specific applicability or applicability to a 2021+ Audi BEV/PHEV. ([bentleymotors-us.erwin-store.com](https://bentleymotors-us.erwin-store.com/erwin/download.sealed?articleId=168800&utm_source=openai)) Source

B10C654 quick answer

B10C654 is defined as “Running-in regulation — No basic setting.” It indicates that a required basic setting for a running-in regulation has not been recorded or completed. The code listing confirms this wording, but does not establish which makes or models it applies to.

Is B10C654 generic or manufacturer-specific?

B10C654 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B10C654 works in the vehicle

A basic setting is a control-module setup or calibration procedure. “No basic setting” means the relevant setup may be missing or incomplete; the code alone does not identify a failed part or confirm the cause.

B10C654 symptoms

The reference provides no confirmed symptoms. Depending on the vehicle and system, a missing basic setting may be recorded without an obvious driver-facing symptom, or may be associated with a warning or system behavior. Check the vehicle-specific information rather than assuming either.

Possible causes of B10C654

Possible context includes a setup procedure that was not completed, or a setting that needs to be established after service or a reset. These are possibilities, not confirmed causes for this code on a particular vehicle.

How to diagnose B10C654

  1. Confirm the exact code and the control module that reported it with a scan tool suitable for the vehicle.
  2. Record other codes and available freeze-frame or event data before clearing anything.
  3. Check authoritative service information for the exact vehicle and module to confirm the code definition and required procedure.
  4. Have a qualified technician determine whether the specified basic setting is appropriate and perform it using the approved procedure.
  5. Rescan the vehicle and verify whether the code returns.

How to fix B10C654

Do not replace parts based on B10C654 alone. If vehicle-specific service information confirms a missing basic setting, have the appropriate procedure completed by a qualified technician. No confirmed component failure, recall, or technical service bulletin is established by the supplied reference.

Can I drive with B10C654?

The code definition alone does not establish whether the vehicle is safe to drive. Follow any warning messages and the vehicle manual; if the vehicle behaves abnormally or displays a safety-related warning, stop when safe and seek qualified assistance.

B10C654 frequently asked questions

What does B10C654 mean?

The supplied code listing defines it as “Running-in regulation — No basic setting,” meaning a required setup or calibration may be missing or incomplete.

Does B10C654 identify a failed part?

No. The definition does not name a failed component or establish the cause.

Does this code apply to a specific make or model?

The reference confirms the code wording in a Bentley erWin list but does not establish applicability to other makes, models, or particular vehicles. Verify it using vehicle-specific service information.

Can I clear the code myself?

Clearing it may not address a missing basic setting. Record the code and related data, then follow the vehicle-specific diagnostic procedure.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.