B116816 Code: Meaning & Diagnostic Guide
Steering angle sensor voltage too low. The 2013 Volkswagen Golf diagnostic report lists B116816 with this description; an Audi technical service bulletin independently gives the same definition. Neither establishes applicability to a 2021+ BEV or PHEV.
What does B116816 mean?
- GENERIC: Steering angle sensor voltage too low. The 2013 Volkswagen Golf diagnostic report lists B116816 with this description; an Audi technical service bulletin independently gives the same definition. Neither establishes applicability to a 2021+ BEV or PHEV. Source
B116816 quick answer
B116816 is generically defined as “steering angle sensor voltage too low.” The code describes a low-voltage condition; by itself, it does not confirm that the sensor has failed.
Is B116816 generic or manufacturer-specific?
B116816 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B116816 works in the vehicle
A steering angle sensor reports how far the steering wheel is turned. “Voltage too low” means the reported electrical signal is below the expected range. The cause and vehicle-specific meaning should be confirmed using information for the exact vehicle.
B116816 symptoms
Depending on the vehicle and related faults, possible context may include a steering or stability-control warning, or a fault appearing during a scan. The supplied evidence does not establish particular symptoms for every vehicle with this code.
Possible causes of B116816
Possibilities to investigate include a sensor signal problem, an electrical connection or wiring issue, or a supply-voltage concern. The code alone does not identify a confirmed failed part.
How to diagnose B116816
- Record the code and any other stored codes, warning messages, and relevant symptoms.
- Confirm the code definition and test procedure in service information for the exact vehicle.
- Have a qualified technician check the sensor circuit, connectors, wiring, and specified voltage readings.
- Use vehicle-specific scan data and test results to determine whether the sensor or another part of the circuit is at fault.
How to fix B116816
Base repairs on vehicle-specific test results rather than replacing the sensor from the code alone. Have electrical checks and any required calibration performed according to the manufacturer's service information. This code's definition does not establish applicability to a particular model or powertrain.
Can I drive with B116816?
If steering behavior changes or a steering or stability-control warning appears, arrange prompt professional assessment. Avoid driving if steering control seems impaired; otherwise, follow the vehicle's warning guidance and seek diagnosis.
B116816 frequently asked questions
What does B116816 mean?
It is generically defined as steering angle sensor voltage too low.
Does B116816 prove the steering angle sensor is bad?
No. It identifies a low-voltage condition, not a confirmed failed component. The sensor circuit and vehicle-specific test results need to be checked.
Can B116816 apply to any vehicle?
The supplied evidence gives a generic definition but does not establish applicability to every vehicle. Confirm the code meaning using service information for the exact vehicle.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.