Source-backed diagnostic reference

B1206 Code: Meaning & Diagnostic Guide

EIC Switch-1 Assembly Circuit Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1206 mean?

  • OTHER: EIC Switch-1 Assembly Circuit Open Source

B1206 quick answer

B1206 is listed as “EIC Switch-1 Assembly Circuit Open.” This indicates a possible open electrical path in the circuit identified by that description; it does not by itself confirm which part has failed. The meaning and diagnostic procedure may vary by vehicle.

Is B1206 generic or manufacturer-specific?

B1206 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1206 works in the vehicle

“Circuit open” means the expected electrical connection may be interrupted, so a signal or current may not pass as intended. The available reference does not define “EIC” or identify vehicle applicability, so confirm the code meaning using service information for the specific vehicle.

B1206 symptoms

Depending on the vehicle and circuit, there may be a warning light, an affected switch function, or no noticeable symptom. These possibilities are not confirmed for every vehicle reporting B1206.

Possible causes of B1206

Possible explanations include a loose or damaged connection, wiring damage, a circuit issue, or a problem with a related switch assembly. The code alone does not establish a cause or confirm a failed component.

How to diagnose B1206

  1. Confirm the vehicle’s make, model, year, and the code definition in vehicle-specific service information.
  2. Use a compatible scan tool to record B1206 and any other stored codes before clearing anything.
  3. Check the relevant switch function and note any related symptoms or warning messages.
  4. Have the circuit and connections inspected using the vehicle manufacturer’s diagnostic procedure; avoid probing or repairing high-voltage systems.
  5. Use test results and service information to identify the fault before replacing parts.

How to fix B1206

The appropriate repair depends on vehicle-specific test results. A qualified technician can check the relevant wiring, connections, and switch assembly, then repair or replace only what testing supports. Do not assume the switch assembly itself has failed.

Can I drive with B1206?

The reference does not establish whether it is safe to drive with B1206. Consider the vehicle’s symptoms and consult its manual or a qualified technician; avoid driving if an affected function makes vehicle operation unsafe.

B1206 frequently asked questions

What does B1206 mean?

The supplied reference describes B1206 as “EIC Switch-1 Assembly Circuit Open.” Confirm that definition for the specific vehicle.

Does B1206 prove the switch assembly is bad?

No. It describes a possible open circuit and does not identify a confirmed failed component.

Can I drive with B1206?

The available evidence does not give a universal drive-safety conclusion. The answer depends on the vehicle and any affected functions.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.