Source-backed diagnostic reference

B1240 Code: Meaning & Diagnostic Guide

Wiper Washer Rear Pump Relay Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1240 mean?

  • OTHER: Wiper Washer Rear Pump Relay Circuit Failure Source

B1240 quick answer

B1240 is a body-system diagnostic trouble code described as a rear washer pump relay circuit failure. It points to a possible electrical-circuit problem; it does not by itself confirm which part has failed.

Is B1240 generic or manufacturer-specific?

B1240 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1240 works in the vehicle

A relay is an electrically controlled switch. The code description indicates that the rear washer pump relay circuit may not be operating as expected. The exact detection conditions and circuit layout can vary by vehicle, so check vehicle-specific service information.

B1240 symptoms

Depending on the vehicle and the underlying issue, the rear washer may not spray or may work intermittently. A stored code alone does not establish that a symptom is present.

Possible causes of B1240

Possible causes include a fuse, relay, wiring, connector, pump, or control-circuit issue. These are diagnostic possibilities, not confirmed failed components.

How to diagnose B1240

  1. Confirm the code with a compatible scan tool and note any related codes.
  2. Check whether the rear washer operates and record any intermittent behavior.
  3. Consult vehicle-specific wiring diagrams and service information for the circuit.
  4. Inspect relevant fuses, connectors, and wiring for damage, looseness, or corrosion.
  5. Have the relay circuit and pump tested using the vehicle maker's diagnostic procedure before replacing parts.

How to fix B1240

Repair or replace only the component or wiring fault confirmed by testing. Clear the code and retest the system after the repair. Do not assume the pump or relay itself is faulty based on B1240 alone.

Can I drive with B1240?

This code does not by itself determine whether the vehicle is safe to drive. If reduced rear visibility is a concern, avoid driving in conditions where you need the rear washer until the issue is checked.

B1240 frequently asked questions

What does B1240 mean?

The supplied description identifies B1240 as a rear washer pump relay circuit failure. It indicates a possible circuit problem, not a confirmed failed part.

Does B1240 mean the rear washer pump must be replaced?

No. The relay, wiring, connectors, fuse, pump, or control circuit may need checking; diagnosis is needed before replacing parts.

Can I drive with B1240?

The code alone does not establish whether driving is safe. Consider whether the washer problem affects visibility and seek diagnosis if it does.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.