Source-backed diagnostic reference

B1241 Code: Meaning & Diagnostic Guide

Wiper Washer Rear Pump Relay Circuit Short to Battery

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1241 mean?

  • OTHER: Wiper Washer Rear Pump Relay Circuit Short to Battery Source

B1241 quick answer

B1241 is described as a rear wiper washer pump relay circuit short to battery. It indicates that the circuit may have voltage where it is not expected; the code alone does not identify a confirmed failed part.

Is B1241 generic or manufacturer-specific?

B1241 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1241 works in the vehicle

B1241 is a body-system diagnostic trouble code. In the supplied reference, its description is “Wiper Washer Rear Pump Relay Circuit Short to Battery.” A short to battery generally means a circuit is connected to, or sensing, battery voltage unexpectedly. The exact circuit design and diagnostic procedure can vary by vehicle.

B1241 symptoms

Depending on the vehicle and the underlying issue, the rear washer may not work, may operate unexpectedly, or a warning light or stored code may be present. These are possibilities, not symptoms established by the code itself.

Possible causes of B1241

Possible causes include damaged or shorted wiring, a connector problem, a relay or pump circuit fault, or an issue with a control module. B1241 alone does not confirm which component, if any, has failed.

How to diagnose B1241

  1. Confirm the code with a compatible scan tool and note any other stored codes.
  2. Check whether the rear washer and wiper operate as expected, following the vehicle owner's manual.
  3. Inspect accessible wiring and connectors in the rear washer circuit for visible damage, corrosion, or loose connections.
  4. Have the circuit, relay, pump, and relevant fuses tested using the vehicle-specific wiring diagram and service information.
  5. If the cause is not clear, consult a qualified technician rather than replacing parts based only on the code.

How to fix B1241

Repair should follow the vehicle-specific test results. Depending on what testing finds, this may involve correcting wiring or connector damage or addressing a verified relay, pump, fuse, or control-circuit fault. Do not assume a particular part needs replacement from B1241 alone.

Can I drive with B1241?

The code alone does not establish whether the vehicle is safe or unsafe to drive. If the rear washer or wiper is impaired, reduced rear visibility may be a concern; avoid conditions where you rely on it and stop safely if visibility becomes inadequate. Check the owner's manual or seek professional advice if other warnings or symptoms are present.

B1241 frequently asked questions

What does B1241 mean?

The supplied reference describes B1241 as a rear wiper washer pump relay circuit short to battery, meaning the circuit may have unexpected battery voltage.

Does B1241 prove the rear washer pump has failed?

No. The code points to a circuit condition, not a confirmed failed pump. Wiring, connectors, the relay, or other circuit components may need testing.

Can I keep driving with B1241?

The code alone cannot determine that. Consider whether the rear washer or wiper works and whether visibility is adequate; consult the owner's manual or a technician if uncertain.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.