Source-backed diagnostic reference

B1302 Code: Meaning & Diagnostic Guide

Accessory Delay Relay Coil Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1302 mean?

  • OTHER: Accessory Delay Relay Coil Circuit Failure Source

B1302 quick answer

B1302 is listed as “Accessory Delay Relay Coil Circuit Failure.” The code points to an issue in the relay coil circuit, but its meaning and diagnostic details can vary by vehicle.

Is B1302 generic or manufacturer-specific?

B1302 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1302 works in the vehicle

An accessory delay relay can keep certain accessories powered briefly after the ignition is switched off. The relay coil is the part that controls the relay. A circuit-failure code indicates that the control circuit may not be operating as expected; it does not by itself confirm which part has failed.

B1302 symptoms

Depending on the vehicle and which accessories use this circuit, possible signs may include accessories that do not remain powered as expected or that behave intermittently. Some vehicles may show no obvious symptoms.

Possible causes of B1302

Possible causes include a relay or coil problem, damaged wiring or connectors, a poor electrical connection, or a control-circuit issue. These are possibilities, not confirmed causes for a specific vehicle.

How to diagnose B1302

  1. Confirm the code using a compatible scan tool and note any other stored codes.
  2. Check the vehicle’s service information for the exact B1302 definition and diagnostic procedure.
  3. Inspect relevant fuses, wiring, and connectors for visible damage or poor connections, following the service procedure.
  4. Have a qualified technician test the relay circuit and its controls before replacing parts.

How to fix B1302

Repair should follow vehicle-specific test results. A relay replacement may be appropriate only if testing confirms it is faulty; wiring, connections, or control circuitry may also need attention. Avoid replacing parts based on the code alone.

Can I drive with B1302?

This code alone does not establish whether the vehicle is safe or unsafe to drive. If the issue affects an accessory needed for safe operation, or other warning signs appear, seek professional advice before driving.

B1302 frequently asked questions

What does B1302 mean?

The supplied reference describes B1302 as an accessory delay relay coil circuit failure. The exact interpretation can depend on the vehicle.

Does B1302 prove the relay has failed?

No. It identifies a circuit fault, but testing is needed to determine whether the relay, wiring, connections, or control circuit is responsible.

Can I keep driving with B1302?

The code alone cannot determine drivability or safety. Consider which accessories are affected and consult a qualified technician if operation is uncertain.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.