Source-backed diagnostic reference

B1303 Code: Meaning & Diagnostic Guide

Accessory Delay Relay Coil Circuit Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1303 mean?

  • OTHER: Accessory Delay Relay Coil Circuit Open Source

B1303 quick answer

B1303 is listed in the supplied reference as “Accessory Delay Relay Coil Circuit Open.” It indicates an open electrical path in the relay-coil circuit, but does not by itself confirm which part has failed.

Is B1303 generic or manufacturer-specific?

B1303 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1303 works in the vehicle

An open circuit means electrical continuity may be interrupted or have excessive resistance. The exact meaning and diagnostic procedure can vary by vehicle, so check whether B1303 applies to the specific make, model, and year.

B1303 symptoms

Depending on the vehicle and the affected accessory-delay function, accessories may not stay on or switch off as expected after the ignition is turned off. Some vehicles may show no obvious symptom. These possibilities are not confirmed for every vehicle reporting B1303.

Possible causes of B1303

Possible causes include damaged wiring, a poor or corroded connector, a relay-coil fault, or another issue in the control circuit. The code alone does not establish a failed component.

How to diagnose B1303

  1. Confirm the vehicle-specific definition of B1303 using reliable service information.
  2. Record the code and check for other codes or relevant symptoms before clearing anything.
  3. Have a qualified technician inspect the relay circuit, wiring, and connectors using the vehicle’s specified diagnostic procedure.
  4. Verify the repair by retesting the circuit and checking whether the code returns.

How to fix B1303

Repair should address the fault confirmed by diagnosis; replacing the relay based on the code alone may not resolve it. Use vehicle-specific service information or consult a qualified technician. Do not attempt hazardous high-voltage repairs.

Can I drive with B1303?

The code alone does not establish whether the vehicle is safe to drive. If the vehicle has other warning lights, electrical problems, or abnormal behavior, consult the owner’s manual and arrange prompt professional inspection.

B1303 frequently asked questions

What does B1303 mean?

The supplied reference describes B1303 as “Accessory Delay Relay Coil Circuit Open,” meaning the relay-coil circuit may have an interrupted electrical path.

Does B1303 prove the relay has failed?

No. Wiring, connectors, or another part of the control circuit may also be involved; diagnosis is needed to identify the cause.

Can I drive with B1303?

The code alone is not enough to determine that. Consider any other symptoms or warnings, check the owner’s manual, and seek professional advice if the vehicle behaves abnormally.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.