Source-backed diagnostic reference

B1319 Code: Meaning & Diagnostic Guide

Driver Door Ajar Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1319 mean?

  • OTHER: Driver Door Ajar Circuit Failure Source

B1319 quick answer

B1319 is listed in the supplied reference as a driver door ajar circuit failure. The code alone does not confirm which part, if any, has failed.

Is B1319 generic or manufacturer-specific?

B1319 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1319 works in the vehicle

B1319 is a body-related diagnostic trouble code (DTC). In the supplied database, it describes a fault in the circuit that reports whether the driver door is ajar. Code meanings and diagnostic procedures can vary by vehicle, so check the vehicle-specific service information.

B1319 symptoms

Depending on the vehicle and the underlying issue, possible signs include an incorrect door-ajar warning, an interior light that behaves unexpectedly, or a door-status message. These symptoms are not confirmed by the code alone.

Possible causes of B1319

Possible causes may include a door-latch or ajar-status switch issue, damaged or loose wiring or connectors, or a related circuit problem. B1319 does not establish a failed component.

How to diagnose B1319

  1. Confirm the code and check for other stored codes with a suitable diagnostic scanner.
  2. Use vehicle-specific service information to verify what B1319 means for the make, model, and year.
  3. Check whether the driver-door status shown by the vehicle or scan tool matches the door's actual position.
  4. Inspect accessible door wiring and connectors for visible damage or looseness; avoid probing circuits unless following the correct service procedure.
  5. Have a qualified technician test the relevant switch and circuit if the cause is not apparent.

How to fix B1319

The appropriate repair depends on vehicle-specific testing. A technician may need to address a connection, wiring, switch, latch, or another circuit issue; do not replace parts based on the code alone.

Can I drive with B1319?

B1319 alone does not establish whether the vehicle is safe to drive. Make sure the driver door closes and latches securely. If it does not, or if other warnings or operating problems occur, do not drive until it has been checked.

B1319 frequently asked questions

What does B1319 mean?

The supplied reference describes B1319 as a driver door ajar circuit failure. The exact interpretation may vary by vehicle.

Does B1319 mean the door latch has failed?

No. It identifies a circuit-related fault description, not a confirmed failed part. Vehicle-specific diagnosis is needed.

Can I keep driving with B1319?

The code alone cannot determine that. Confirm the driver door latches securely, and seek inspection if it does not or if other warning signs appear.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.