Source-backed diagnostic reference

B1402 Code: Meaning & Diagnostic Guide

Driver Power Window Down Switch Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1402 mean?

  • OTHER: Driver Power Window Down Switch Circuit Failure Source

B1402 quick answer

B1402 generally means a fault has been detected in the driver power-window down-switch circuit. The code identifies a circuit issue; by itself, it does not confirm which part has failed.

Is B1402 generic or manufacturer-specific?

B1402 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1402 works in the vehicle

B1402 is a body-related diagnostic trouble code. In plain language, the vehicle’s control system has detected an issue with the electrical circuit associated with the driver’s window-down switch. The exact diagnostic procedure and circuit design can vary by vehicle.

B1402 symptoms

Depending on the vehicle and fault, the driver’s window may not move down, may work intermittently, or may operate normally despite the stored code. These are possibilities, not symptoms confirmed by the code alone.

Possible causes of B1402

Possible areas to investigate include the window switch, its connector, related wiring, or another part of the window-control circuit. B1402 alone does not establish a failed component or root cause.

How to diagnose B1402

  1. Confirm the code with a compatible scan tool and check whether it is current or stored.
  2. Note whether the driver’s window responds to the switch and whether other window controls work.
  3. Using vehicle-specific service information, inspect the switch and accessible connectors for damage or poor connection.
  4. Have a qualified technician test the relevant circuit and components according to the vehicle’s wiring diagram.
  5. Clear the code only after any identified issue is addressed, then check whether it returns.

How to fix B1402

The appropriate repair depends on testing. A switch, connector, wiring, or another circuit component may need attention, but do not replace parts based on B1402 alone. Use service information for the specific vehicle or consult a qualified technician.

Can I drive with B1402?

B1402 concerns the driver’s power-window down-switch circuit, not a confirmed engine or braking fault. If the window is stuck open or its operation creates a visibility or security concern, address that before driving when practical. The code alone cannot determine whether the vehicle is safe to drive.

B1402 frequently asked questions

What does code B1402 mean?

It generally indicates a fault in the driver power-window down-switch circuit.

Does B1402 prove the window switch is bad?

No. The code points to a circuit issue but does not identify a confirmed failed component.

Can I diagnose B1402 without vehicle-specific information?

You can note the window’s behavior and check for visible connector damage, but circuit testing should follow service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.