Source-backed diagnostic reference

B1467 Code: Meaning & Diagnostic Guide

Wiper Hi/Low Speed Circuit Motor Short To Battery

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1467 mean?

  • OTHER: Wiper Hi/Low Speed Circuit Motor Short To Battery Source

B1467 quick answer

B1467 is listed as a wiper high/low speed circuit motor short to battery code. It indicates that the circuit may be detecting battery voltage where it is not expected; the code alone does not confirm which part has failed.

Is B1467 generic or manufacturer-specific?

B1467 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1467 works in the vehicle

The supplied generic description associates B1467 with the wiper motor’s high- and low-speed circuit. “Short to battery” means an electrical path may be allowing battery voltage into a circuit unexpectedly. The exact interpretation and test procedure can vary by vehicle, so check the service information for the specific make, model, and year.

B1467 symptoms

Depending on the vehicle and fault, wipers might fail to operate, work only at certain speeds, behave intermittently, or remain on. A stored code may also be present without an obvious symptom.

Possible causes of B1467

Possibilities include damaged wiring or connectors, a poor connection, a wiper motor circuit problem, or an issue in the control circuitry. B1467 by itself does not identify a confirmed failed component.

How to diagnose B1467

  1. Confirm the vehicle’s exact code definition and diagnostic procedure using reliable service information.
  2. Note when the code was set and whether the wipers show any abnormal behavior.
  3. With the ignition off, visually check accessible wiper wiring and connectors for damage, corrosion, or looseness.
  4. Have a qualified technician test the circuit according to the vehicle-specific procedure before replacing parts.

How to fix B1467

Repair depends on the cause found during testing. Address verified wiring or connection faults, or replace a component only when diagnosis supports it. Clear the code and confirm the repair using the appropriate vehicle-specific procedure.

Can I drive with B1467?

If the wipers do not work reliably, avoid driving in rain, snow, or other conditions where visibility could be reduced. If visibility is impaired, stop somewhere safe and arrange assistance.

B1467 frequently asked questions

What does B1467 mean?

The supplied generic reference describes B1467 as a wiper high/low speed circuit motor short to battery code. Its exact meaning should be confirmed for the specific vehicle.

Does B1467 prove the wiper motor has failed?

No. The code points to a circuit condition, not a confirmed failed part. Wiring, connections, or control circuitry may also need diagnosis.

Can I keep driving with B1467?

Driving risk depends on wiper operation and weather. Do not drive where visibility may be compromised if the wipers are unreliable.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.