Source-backed diagnostic reference

B1491 Code: Meaning & Diagnostic Guide

Ignition Cylinder Sensor Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1491 mean?

  • OTHER: Ignition Cylinder Sensor Circuit Failure Source

B1491 quick answer

B1491 is described as an ignition cylinder sensor circuit failure. It points to a problem detected in that circuit, but the code alone does not identify a failed part or confirm the cause.

Is B1491 generic or manufacturer-specific?

B1491 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1491 works in the vehicle

The ignition cylinder sensor circuit carries a signal related to the ignition cylinder. “Circuit failure” means the vehicle’s control system detected an abnormality in that circuit. The exact meaning and diagnostic procedure can vary by vehicle.

B1491 symptoms

Depending on the vehicle and the underlying issue, there may be no obvious symptoms or there may be ignition or starting-related problems. The code by itself does not confirm any particular symptom.

Possible causes of B1491

B1491 does not establish a specific cause. The issue may be somewhere in the sensor circuit; further testing is needed to determine whether the sensor, its connections, wiring, or another circuit condition is involved.

How to diagnose B1491

  1. Record B1491 and any other stored codes, along with the conditions under which they appeared.
  2. Check vehicle-specific service information for the exact definition and diagnostic procedure.
  3. Have the ignition cylinder sensor circuit and its connections inspected for visible damage or poor connections.
  4. Test the circuit using the vehicle maker’s procedure to identify the cause before replacing parts.
  5. After any verified repair, clear the code and check whether it returns.

How to fix B1491

The appropriate repair depends on circuit testing and vehicle-specific service information. Avoid replacing parts based on the code alone; consult a qualified technician if diagnosis requires electrical testing.

Can I drive with B1491?

B1491 alone does not establish whether the vehicle is safe to drive. If it has trouble starting or other ignition-related problems, arrange prompt assessment and avoid relying on it until the issue is checked.

B1491 frequently asked questions

What does B1491 mean?

It is described as an ignition cylinder sensor circuit failure. It identifies a detected circuit problem, not a confirmed failed component.

Does B1491 mean the ignition cylinder sensor must be replaced?

No. Testing is needed to determine whether the sensor or another part of the circuit is responsible.

Can I keep driving with B1491?

The code alone cannot determine that. Consider how the vehicle behaves, and have it checked promptly if starting or ignition-related problems occur.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.