Source-backed diagnostic reference

B1507 Code: Meaning & Diagnostic Guide

Flash To Pass Switch Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1507 mean?

  • OTHER: Flash To Pass Switch Circuit Failure Source

B1507 quick answer

B1507 is described in the supplied reference as “Flash To Pass Switch Circuit Failure.” It indicates a fault associated with the circuit for the flash-to-pass switch; it does not by itself identify a failed part.

Is B1507 generic or manufacturer-specific?

B1507 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1507 works in the vehicle

B1507 is a body-system diagnostic trouble code (the “B” prefix denotes a body-related code). “Flash to pass” refers to using a vehicle’s lights to signal another driver. A circuit failure means the system has detected an electrical or signal problem, but the code alone does not establish its cause. Code definitions and diagnostic procedures can vary by vehicle.

B1507 symptoms

Depending on the vehicle and fault, the flash-to-pass function might not work, work intermittently, or behave unexpectedly. These are possible symptoms, not confirmed by the code reference.

Possible causes of B1507

Possible areas to investigate include the switch, its wiring or connectors, and related control circuitry. The supplied information does not confirm a failed component or a specific cause.

How to diagnose B1507

  1. Check the vehicle’s service information for the exact B1507 definition and test procedure.
  2. Note whether the flash-to-pass function works consistently and whether other lighting functions are affected.
  3. Use a compatible scan tool to read and record related codes and available freeze-frame or status information.
  4. Have the switch, connectors, wiring, and related control circuitry checked using the vehicle-specific procedure; avoid replacing parts based on the code alone.

How to fix B1507

The appropriate repair depends on test results and the vehicle-specific diagnostic procedure. A qualified technician can determine whether the issue involves the switch, wiring, connectors, or control circuitry. The reference does not establish a particular repair.

Can I drive with B1507?

The code alone does not establish whether the vehicle is safe to drive. If required exterior lights are not working, or lighting behaves unpredictably, arrange an inspection and follow local lighting requirements. Do not rely on the flash-to-pass function until it has been checked.

B1507 frequently asked questions

What does B1507 mean?

The supplied reference describes B1507 as “Flash To Pass Switch Circuit Failure,” indicating a detected problem associated with that switch circuit.

Does B1507 prove the flash-to-pass switch is bad?

No. The code identifies a circuit-related fault, not a confirmed failed part. Vehicle-specific testing is needed.

Can I drive with B1507?

The code alone cannot determine that. Check whether required lights work normally and have any lighting problem inspected.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.