Source-backed diagnostic reference

B1595 Code: Meaning & Diagnostic Guide

Ignition Switch Illegal Input Code

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1595 mean?

  • OTHER: Ignition Switch Illegal Input Code Source

B1595 quick answer

B1595 is listed as “Ignition Switch Illegal Input Code.” The available reference does not identify a vehicle make or confirm a failed part.

Is B1595 generic or manufacturer-specific?

B1595 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1595 works in the vehicle

“Illegal input” means a control module detected an ignition-switch signal or state it considers invalid. The exact meaning and diagnostic procedure can vary by vehicle.

B1595 symptoms

Possible signs may include difficulty starting, unusual ignition behavior, or a warning light, but the reference does not establish any symptoms for this code.

Possible causes of B1595

The code alone does not confirm a cause. Depending on the vehicle, an unexpected signal could relate to the switch, wiring or connectors, or how a control module interprets the input.

How to diagnose B1595

  1. Confirm the vehicle’s year, make, model, and the module that reported B1595.
  2. Look up the vehicle-specific code description and test procedure in reliable service information.
  3. Use a compatible scan tool to record related codes and relevant data before clearing anything.
  4. Have a qualified technician check the ignition-switch signal and its wiring and connectors using the specified procedure.
  5. Recheck for the code after any verified issue is addressed.

How to fix B1595

Do not replace the ignition switch based on this code alone. Repair or replace a component only if vehicle-specific testing identifies it as faulty; consult a qualified technician if the diagnosis is unclear.

Can I drive with B1595?

The reference does not establish whether it is safe to drive with B1595. If the vehicle has starting, stalling, or ignition-control problems, avoid relying on it until it has been assessed; otherwise, seek vehicle-specific advice.

B1595 frequently asked questions

Does B1595 mean the ignition switch has failed?

No. The description names an ignition-switch input, but the code alone does not confirm a failed switch.

Is B1595 the same on every vehicle?

Not necessarily. The supplied reference does not specify a manufacturer, so check the definition and test procedure for the particular vehicle.

Can I clear B1595 and ignore it?

Clearing the code does not diagnose its cause. Record the code and related data, then follow the vehicle-specific diagnostic procedure.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.