Source-backed diagnostic reference

B1601 Code: Meaning & Diagnostic Guide

PATS Received Incorrect Key-Code From Ignition Key Transponder

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1601 mean?

  • OTHER: PATS Received Incorrect Key-Code From Ignition Key Transponder Source

B1601 quick answer

B1601 indicates that the vehicle’s anti-theft system received an incorrect key code from the ignition-key transponder. The code alone does not identify a failed part or confirm that the same procedure applies to every vehicle.

Is B1601 generic or manufacturer-specific?

B1601 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1601 works in the vehicle

The supplied description associates B1601 with PATS, commonly meaning Passive Anti-Theft System. In plain language, the system did not recognize the code sent by the key transponder. Exact meanings and diagnostic procedures can vary by vehicle.

B1601 symptoms

Depending on the vehicle, a key-recognition problem may be associated with difficulty starting, a no-start condition, or an anti-theft warning. These symptoms do not confirm B1601 or prove that a particular component has failed.

Possible causes of B1601

The code description points to an incorrect key code being received. Possible areas to check include the key or transponder, key programming, or the vehicle’s key-reading system; the code alone does not establish which, if any, is at fault.

How to diagnose B1601

  1. Record B1601 and any other stored codes before clearing anything.
  2. Check the vehicle-specific service information for the exact definition and test procedure.
  3. If available, try another key already programmed for that vehicle and note whether the behavior changes.
  4. Have a qualified technician or automotive locksmith check key recognition, programming, and the related system using suitable diagnostic equipment.

How to fix B1601

Base repairs on vehicle-specific test results rather than replacing parts from the code alone. A qualified technician or automotive locksmith can determine whether the key needs attention, programming, or further system diagnosis.

Can I drive with B1601?

If the vehicle will not start reliably, arrange diagnosis rather than relying on it for essential travel. If it starts and runs normally, the code alone does not determine whether driving is safe; follow the vehicle’s warnings and seek vehicle-specific advice.

B1601 frequently asked questions

What does code B1601 mean?

The supplied description says the anti-theft system received an incorrect key code from the ignition-key transponder.

Does B1601 prove the key is faulty?

No. It describes a key-code recognition issue, but does not identify a confirmed failed component. Vehicle-specific testing is needed.

Can B1601 cause a no-start?

A key-recognition issue may be associated with a no-start on some vehicles, but symptoms and system behavior vary.

Should I replace a part when B1601 appears?

Not based on the code alone. Check the vehicle-specific diagnostic procedure and test the key-recognition system first.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.