Source-backed diagnostic reference

B1613 Code: Meaning & Diagnostic Guide

Wiper Rear Mode Select Switch Circuit Short To Battery

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1613 mean?

  • OTHER: Wiper Rear Mode Select Switch Circuit Short To Battery Source

B1613 quick answer

B1613 is listed in the supplied reference as “Wiper Rear Mode Select Switch Circuit Short To Battery.” It indicates a possible electrical short or unexpected battery voltage in the rear-wiper mode-select switch circuit; the exact meaning and diagnostic procedure can vary by vehicle.

Is B1613 generic or manufacturer-specific?

B1613 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1613 works in the vehicle

B1613 is a body-system (B) diagnostic trouble code. “Short to battery” means a circuit may be receiving battery voltage where it is not expected. The code alone does not identify a confirmed failed component, and the supplied reference does not establish which manufacturers or models use this definition.

B1613 symptoms

Depending on the vehicle and the underlying issue, the rear wiper may not operate, may operate in the wrong mode, or may behave intermittently. A stored code may also occur without an obvious symptom.

Possible causes of B1613

Possible causes include damaged or pinched wiring, a poor connection, moisture or corrosion in a connector, or a problem with the rear-wiper mode switch or related circuit. These are possibilities, not confirmed causes.

How to diagnose B1613

  1. Confirm the code with a suitable scan tool and note any other codes or symptoms.
  2. Check the vehicle’s service information for the exact B1613 definition and test procedure for its make, model, and year.
  3. Inspect accessible rear-wiper wiring and connectors for visible damage, looseness, moisture, or corrosion.
  4. Have a qualified technician test the switch circuit and wiring against vehicle-specific specifications before replacing parts.

How to fix B1613

Repair or replacement should be based on vehicle-specific test results. A technician may need to repair wiring or connections or address a verified switch or circuit fault. Do not replace parts based on the code alone.

Can I drive with B1613?

The code by itself does not establish whether the vehicle is safe or unsafe to drive. If the rear wiper is needed for visibility in current weather, avoid driving until visibility is adequate or the issue is assessed.

B1613 frequently asked questions

What does B1613 mean?

The supplied reference describes it as a rear-wiper mode-select switch circuit short to battery. The precise interpretation can depend on the vehicle.

Does B1613 prove the rear-wiper switch has failed?

No. It points to a possible circuit-voltage problem but does not confirm which component, if any, has failed.

Can I keep driving with B1613?

The code alone cannot determine that. Consider whether the rear wiper is needed to maintain visibility, and seek a vehicle-specific diagnosis.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.