B1619 Code: Meaning & Diagnostic Guide
Wiper Rear Low Limit Input Circuit Failure
What does B1619 mean?
- OTHER: Wiper Rear Low Limit Input Circuit Failure Source
B1619 quick answer
B1619 is listed as “Wiper Rear Low Limit Input Circuit Failure.” It indicates a problem detected in the rear-wiper low-limit input circuit, but the exact meaning and diagnostic procedure can vary by vehicle.
Is B1619 generic or manufacturer-specific?
B1619 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B1619 works in the vehicle
The low-limit input is a signal used to indicate a rear-wiper position or operating limit. “Circuit failure” means the vehicle detected an unexpected signal or an electrical problem in that circuit; it does not by itself identify a failed part. B1619 is a body-system code, and the supplied reference does not identify a specific manufacturer.
B1619 symptoms
Depending on the vehicle and fault, the rear wiper may not operate, may work intermittently, or may not stop or park as expected. Some vehicles may show no obvious symptom.
Possible causes of B1619
Possibilities include a damaged wire, a poor or corroded connection, a fault in the wiper motor or its position-sensing circuit, or an issue with the controlling module. These are possibilities, not confirmed causes.
How to diagnose B1619
- Confirm B1619 with a compatible scan tool and note any other stored codes.
- Use service information for the exact year, make, and model to confirm the code definition and circuit layout.
- Check the rear-wiper fuse, wiring, and connectors for visible damage, looseness, or corrosion.
- Have the circuit and relevant components tested against vehicle-specific specifications before replacing parts.
How to fix B1619
Repair or replace only the component or wiring confirmed faulty through testing. Because B1619 can be vehicle-specific, consult a qualified technician or the correct service information if the cause is unclear.
Can I drive with B1619?
This code alone does not establish whether the vehicle is safe to drive. If the rear wiper is unavailable and weather or road conditions limit rear visibility, avoid driving until visibility is adequate or the fault is addressed.
B1619 frequently asked questions
What does B1619 mean?
The supplied reference describes it as “Wiper Rear Low Limit Input Circuit Failure.” The exact interpretation can vary by vehicle.
Does B1619 prove the rear-wiper motor has failed?
No. The code points to a detected circuit problem but does not identify a failed component. Testing is needed.
Can I keep driving with B1619?
The code alone does not determine drivability. Consider whether you can maintain adequate rear visibility, especially in poor weather.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.