B1620 Code: Meaning & Diagnostic Guide
Wiper Rear Low Limit Input Circuit Open
What does B1620 mean?
- OTHER: Wiper Rear Low Limit Input Circuit Open Source
B1620 quick answer
B1620 is described as “Wiper Rear Low Limit Input Circuit Open.” It indicates that the rear wiper’s low-limit input circuit is being detected as electrically open, but it does not by itself identify a failed part.
Is B1620 generic or manufacturer-specific?
B1620 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B1620 works in the vehicle
An open circuit means the expected electrical path or signal appears interrupted. “Low limit input” refers to a rear-wiper control input; its exact function and testing procedure can vary by vehicle. Confirm the code definition using vehicle-specific service information.
B1620 symptoms
Depending on the vehicle and fault, the rear wiper may not operate, may behave irregularly, or may not stop in its expected position. The code alone does not confirm that any of these symptoms are present.
Possible causes of B1620
Possible explanations include a loose or corroded connector, damaged wiring, a poor ground, or a problem in a related switch, control circuit, or wiper assembly. These are possibilities, not confirmed causes.
How to diagnose B1620
- Check the vehicle-specific code definition and diagnostic procedure for B1620.
- Note whether the rear wiper operates normally and check for other related warning lights or codes.
- Visually inspect accessible rear-wiper wiring and connectors for looseness, corrosion, or damage.
- Have a qualified technician test the circuit and input signal using the vehicle’s wiring diagram and service information.
- Clear the code only after checks or repairs, then verify whether it returns.
How to fix B1620
Repair should address the fault found during testing, such as a wiring or connector issue. Do not replace the wiper motor or another component based on B1620 alone; use vehicle-specific diagnostic results.
Can I drive with B1620?
This code concerns the rear wiper circuit, but its practical effect depends on the vehicle and whether the wiper is needed for visibility. If rear visibility is impaired, avoid driving in conditions where you cannot see safely and arrange an inspection.
B1620 frequently asked questions
Does B1620 prove the rear wiper motor has failed?
No. The code describes an open low-limit input circuit and does not identify a failed component. Testing is needed to locate the cause.
What does “circuit open” mean?
It means the expected electrical connection or signal appears interrupted, for example because of a connection or wiring problem.
Can I keep driving with B1620?
The code alone does not determine whether driving is safe. If rear-wiper operation or visibility is inadequate for the conditions, avoid driving until visibility is safe.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.