Source-backed diagnostic reference

B1622 Code: Meaning & Diagnostic Guide

Wiper Rear Low Limit Input Circuit Short To Ground

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1622 mean?

  • OTHER: Wiper Rear Low Limit Input Circuit Short To Ground Source

B1622 quick answer

B1622 is listed as “Wiper Rear Low Limit Input Circuit Short To Ground.” It indicates a detected electrical problem involving the rear-wiper low-limit input circuit, but the code alone does not confirm which part has failed.

Is B1622 generic or manufacturer-specific?

B1622 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1622 works in the vehicle

This is a body-system (B) diagnostic trouble code. “Low limit input” refers to a signal used by the system to identify a rear-wiper position or operating limit. “Short to ground” means the circuit may be making an unintended electrical connection to ground. Code definitions and diagnostic procedures can vary by vehicle, so verify B1622 using the vehicle’s service information.

B1622 symptoms

Depending on the vehicle and how the system responds, the rear wiper might not operate as expected, stop in an unusual position, or show an intermittent problem. These symptoms are possibilities, not guaranteed effects of the code.

Possible causes of B1622

Possible areas to investigate include wiring or connectors in the rear-wiper input circuit, a poor connection, or a related switch or sensor. The code does not establish that any particular component has failed.

How to diagnose B1622

  1. Confirm the code and note any other stored codes using a compatible diagnostic tool.
  2. Check vehicle-specific service information for the exact B1622 definition and circuit test procedure.
  3. Inspect accessible rear-wiper wiring and connectors for visible damage, corrosion, looseness, or signs of contact with ground.
  4. Have the circuit and related inputs tested according to the vehicle’s service procedure before replacing parts.

How to fix B1622

Address the fault identified by vehicle-specific testing. A repair may involve correcting a wiring or connector issue or servicing a related component, but do not replace parts based on the code alone. Consult a qualified technician if testing requires specialized equipment or access to vehicle wiring.

Can I drive with B1622?

The code alone does not establish whether the vehicle is safe or unsafe to drive. If rear-window visibility is reduced, avoid driving in conditions where you cannot maintain adequate visibility and arrange inspection.

B1622 frequently asked questions

What does B1622 mean?

The supplied definition is “Wiper Rear Low Limit Input Circuit Short To Ground,” indicating a possible electrical short-to-ground condition in the rear-wiper low-limit input circuit.

Does B1622 identify a failed rear-wiper motor?

No. The code identifies a circuit condition, not a confirmed failed component. Vehicle-specific diagnosis is needed.

Can I keep driving with B1622?

The code by itself does not determine drivability. Consider whether rear-window visibility is adequate and have the issue checked using the vehicle’s service information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.