B1694 Code: Meaning & Diagnostic Guide
Autolamp On Circuit Open
What does B1694 mean?
- OTHER: Autolamp On Circuit Open Source
B1694 quick answer
B1694 is listed as “Autolamp On Circuit Open.” It indicates a possible interruption in an automatic-lighting circuit, but the code alone does not identify the failed part or confirm that every vehicle uses the same definition.
Is B1694 generic or manufacturer-specific?
B1694 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B1694 works in the vehicle
An “open circuit” means electrical continuity may be interrupted somewhere in the circuit. “Autolamp on” refers to an automatic-lighting function. The exact meaning and circuit layout can vary by vehicle, so check the manufacturer’s service information for the specific model.
B1694 symptoms
If the code is relevant to the vehicle, possible symptoms include automatic headlights that do not turn on or off as expected, or a lighting warning. A stored code may also have no obvious symptom.
Possible causes of B1694
Possible explanations include a wiring or connector problem, a power-supply issue, or a fault in a switch or control module. These are possibilities, not confirmed causes; the code by itself does not identify a failed component.
How to diagnose B1694
- Confirm the vehicle’s make, model, year, and the code definition in vehicle-specific service information.
- Use a compatible scan tool to check whether B1694 is current or stored, and note any related codes.
- Check the owner’s manual for the automatic-lighting settings and verify whether the reported symptom can be reproduced.
- Have the relevant circuit and connectors inspected and tested using the vehicle’s service procedure.
- Clear the code only after any identified issue is addressed, then recheck whether it returns.
How to fix B1694
The repair depends on test results. A qualified technician can trace the circuit and determine whether a connection, wiring, power supply, or control component needs attention. Do not replace parts based on the code alone.
Can I drive with B1694?
If automatic lighting is unreliable, use the vehicle’s manual lighting controls as appropriate and make sure required lights are working before driving, especially in poor visibility. Seek prompt inspection if exterior lights fail or the issue affects safe visibility.
B1694 frequently asked questions
What does B1694 mean?
The supplied code reference describes B1694 as “Autolamp On Circuit Open,” suggesting a possible interruption in an automatic-lighting circuit.
Does B1694 identify a specific failed part?
No. The code alone does not confirm which component, if any, has failed. Vehicle-specific diagnosis is needed.
Can I keep driving with B1694?
That depends on whether the vehicle’s lights work correctly and on driving conditions. If lights are unreliable, use manual controls where available and arrange an inspection.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.