B1733 Code: Meaning & Diagnostic Guide
Mirror Driver Vertical Switch Circuit Failure
What does B1733 mean?
- OTHER: Mirror Driver Vertical Switch Circuit Failure Source
B1733 quick answer
B1733 is listed in the supplied reference as “Mirror Driver Vertical Switch Circuit Failure.” It points to a fault associated with the driver-side mirror’s vertical adjustment switch circuit; it does not, by itself, identify a failed part.
Is B1733 generic or manufacturer-specific?
B1733 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B1733 works in the vehicle
B1733 is a body-system diagnostic trouble code in the supplied database. “Circuit failure” means the vehicle detected an electrical problem in the circuit associated with the mirror’s up-and-down adjustment switch. The exact definition and diagnostic procedure can vary by vehicle.
B1733 symptoms
Depending on the vehicle and the underlying issue, the driver-side mirror may not move vertically, may work intermittently, or may behave normally despite the stored code.
Possible causes of B1733
Possible causes include a problem with the adjustment switch, wiring, connectors, mirror assembly, or related control circuitry. The code alone does not confirm which, if any, of these is at fault.
How to diagnose B1733
- Confirm the code definition for the vehicle’s year, make, and model using reliable vehicle-specific service information.
- Check whether the driver-side mirror moves vertically and note any intermittent behavior.
- Have the switch, accessible wiring, and connectors checked for visible damage or poor connections.
- Use the vehicle’s wiring diagram and appropriate diagnostic equipment to locate the circuit fault before replacing parts.
How to fix B1733
Base repairs on vehicle-specific testing rather than replacing a part solely because B1733 is stored. A qualified technician can determine whether a switch, wiring connection, mirror assembly, or another circuit component needs repair.
Can I drive with B1733?
If the mirror cannot be adjusted to provide a clear view, restore adequate visibility before driving. The code alone does not establish whether the vehicle is safe or unsafe to drive.
B1733 frequently asked questions
Does B1733 prove the mirror switch has failed?
No. It identifies a fault associated with the driver-side mirror vertical-switch circuit, but diagnosis is needed to find the cause.
Can I keep driving with B1733?
That depends on whether the mirror provides adequate visibility and on the vehicle’s condition. Make sure you can see clearly before driving.
Will the same repair apply to every vehicle with B1733?
No. The precise code definition and repair procedure may differ by vehicle, so check vehicle-specific service information.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.