Source-backed diagnostic reference

B1735 Code: Meaning & Diagnostic Guide

Mirror Driver Vertical Switch Circuit Short To Battery

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1735 mean?

  • OTHER: Mirror Driver Vertical Switch Circuit Short To Battery Source

B1735 quick answer

B1735 is listed as “Mirror Driver Vertical Switch Circuit Short To Battery.” It points to a possible electrical fault in the circuit for the mirror’s vertical adjustment switch; the code alone does not confirm which part has failed.

Is B1735 generic or manufacturer-specific?

B1735 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1735 works in the vehicle

In this description, “short to battery” means the circuit may be receiving voltage where it should not. The exact circuit design and diagnostic procedure can vary by vehicle, so confirm the code definition using vehicle-specific service information.

B1735 symptoms

Depending on the vehicle and fault, the mirror may not adjust vertically, may move unexpectedly, or the mirror switch may behave inconsistently. These symptoms are possibilities, not confirmation of B1735’s cause.

Possible causes of B1735

Possible causes include damaged or shorted wiring, a poor connector, a faulty mirror adjustment switch, or a problem elsewhere in the circuit. B1735 by itself does not identify a confirmed failed component.

How to diagnose B1735

  1. Confirm B1735 with a compatible scan tool and check for other stored codes.
  2. Use the vehicle’s year-, make-, and model-specific service information to verify the code description and circuit layout.
  3. Check the mirror adjustment switch and accessible connectors for looseness, corrosion, or visible damage.
  4. Have a qualified technician test the circuit according to the service procedure before replacing parts.

How to fix B1735

Repair or replace only the component or wiring confirmed faulty by vehicle-specific testing. If diagnosis requires access to electrical components or wiring you are not equipped to test safely, consult a qualified automotive technician.

Can I drive with B1735?

The code alone does not establish whether the vehicle is safe or unsafe to drive. If the mirror cannot be positioned for a clear view, avoid driving until visibility can be restored or assessed.

B1735 frequently asked questions

What does B1735 mean?

The supplied reference describes B1735 as “Mirror Driver Vertical Switch Circuit Short To Battery,” indicating a possible unwanted voltage condition in the mirror’s vertical adjustment switch circuit.

Does B1735 prove the mirror switch is faulty?

No. Wiring, connectors, the switch, or another part of the circuit may be involved. Testing is needed to identify the cause.

Can I keep driving with B1735?

The code alone cannot determine that. Make sure the mirror provides adequate visibility, and seek an assessment if it cannot be adjusted or positioned reliably.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.