Source-backed diagnostic reference

B1740 Code: Meaning & Diagnostic Guide

Mirror Driver Horizontal Switch Circuit Short To Ground

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1740 mean?

  • OTHER: Mirror Driver Horizontal Switch Circuit Short To Ground Source

B1740 quick answer

B1740 is listed as “Mirror Driver Horizontal Switch Circuit Short To Ground.” It indicates a reported electrical fault in the circuit associated with the horizontal mirror-adjustment switch, but the code alone does not identify the failed part or confirm which vehicles use this definition.

Is B1740 generic or manufacturer-specific?

B1740 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1740 works in the vehicle

A “short to ground” means a circuit may be making an unintended electrical connection to ground. “Horizontal” refers to the mirror’s left-right adjustment direction. Confirm the code definition and diagnostic procedure using information for the specific vehicle.

B1740 symptoms

Depending on the vehicle and fault, the mirror may not adjust horizontally, may behave intermittently, or a warning or stored code may be present. These are possibilities, not symptoms established by the code reference.

Possible causes of B1740

Possible explanations include damaged wiring, a poor or contaminated connector, a switch or related circuit fault, or another vehicle-specific electrical issue. B1740 alone does not confirm a cause or failed component.

How to diagnose B1740

  1. Record the code and any related codes, and confirm the definition against vehicle-specific service information.
  2. Check whether horizontal mirror adjustment works and note any intermittent behavior.
  3. With the vehicle safely parked, visually inspect accessible mirror-switch wiring and connectors for damage or looseness; avoid probing circuits without the correct procedure.
  4. Have a qualified technician test the circuit using the vehicle-specific wiring diagram and diagnostic procedure.

How to fix B1740

Repair should follow the test results and vehicle-specific service information. A wiring or connector repair may be appropriate if confirmed; do not replace the switch or mirror assembly based on B1740 alone.

Can I drive with B1740?

If mirror adjustment is affected, set the mirrors before driving and make sure you have adequate visibility. If you cannot maintain a safe view around the vehicle, avoid driving until the issue is assessed.

B1740 frequently asked questions

What does B1740 mean?

The supplied reference describes it as “Mirror Driver Horizontal Switch Circuit Short To Ground.” Confirm that definition for the specific vehicle.

Does B1740 prove the mirror switch is faulty?

No. The code points to a circuit condition; diagnosis is needed to determine whether wiring, a connector, the switch, or another issue is involved.

Can I keep driving with B1740?

It depends on whether mirror adjustment or visibility is affected. Ensure you have adequate visibility before driving; if not, avoid driving until the issue is assessed.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.