Source-backed diagnostic reference

B1745 Code: Meaning & Diagnostic Guide

Mirror Passenger Horizontal Switch Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1745 mean?

  • OTHER: Mirror Passenger Horizontal Switch Circuit Failure Source

B1745 quick answer

B1745 is a body-system diagnostic code that the supplied database describes as “Mirror Passenger Horizontal Switch Circuit Failure.” It points to a detected problem in the passenger-side mirror’s horizontal adjustment switch circuit, but does not identify a confirmed failed part.

Is B1745 generic or manufacturer-specific?

B1745 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1745 works in the vehicle

“Horizontal” refers to left-and-right mirror adjustment. “Circuit failure” means the vehicle detected an electrical issue in the related switch circuit; the code alone does not establish whether the switch, wiring, connector, or another part is responsible. The exact interpretation can vary by vehicle.

B1745 symptoms

Depending on the vehicle and the underlying issue, the passenger mirror may not move left or right, may respond intermittently, or may operate normally despite the stored code.

Possible causes of B1745

Possible explanations include a problem with the mirror adjustment switch, its wiring or connector, or another part of the vehicle’s mirror-control circuit. These are diagnostic possibilities, not confirmed causes.

How to diagnose B1745

  1. Confirm the code and note any other stored codes with a suitable scan tool.
  2. Identify the vehicle’s make, model, year, and equipment, then consult its service information for the code-specific test procedure.
  3. Check whether the passenger mirror responds to horizontal adjustment and whether other mirror controls work.
  4. Visually inspect accessible switch connectors and wiring for looseness or damage; avoid probing circuits without the correct procedure.
  5. If the cause is not clear, have a qualified technician perform the vehicle-specific electrical checks.

How to fix B1745

Repair should follow the test results rather than assuming a particular part has failed. A technician may need to repair a wiring or connector issue or replace a verified faulty component. Recheck the system after repairs.

Can I drive with B1745?

Consider whether the passenger mirror can be positioned to provide adequate visibility before driving. If it cannot, arrange repair or another suitable way to address the visibility issue before continuing.

B1745 frequently asked questions

What does B1745 mean?

The supplied database describes B1745 as “Mirror Passenger Horizontal Switch Circuit Failure,” indicating a detected issue in the passenger mirror’s left-right adjustment switch circuit.

Does B1745 prove the mirror switch is bad?

No. The code identifies a circuit issue but does not confirm which component or connection is responsible.

Can I diagnose B1745 without knowing the vehicle?

You can confirm the code and note the symptoms, but the exact test procedure depends on the vehicle. Use vehicle-specific service information or consult a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.