Source-backed diagnostic reference

B1782 Code: Meaning & Diagnostic Guide

Mirror Passenger Up Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1782 mean?

  • OTHER: Mirror Passenger Up Circuit Failure Source

B1782 quick answer

B1782 is listed as “Mirror Passenger Up Circuit Failure.” It points to a possible problem in the circuit used to move the passenger-side mirror upward; the code alone does not confirm which part is faulty.

Is B1782 generic or manufacturer-specific?

B1782 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1782 works in the vehicle

The supplied reference classifies B1782 as a body (B) code. “Circuit failure” means the control system detected an issue in the electrical path or operation associated with the passenger mirror’s upward movement. The exact meaning and diagnostic procedure can vary by vehicle.

B1782 symptoms

Depending on the vehicle and the underlying issue, the passenger mirror may not move upward or may operate inconsistently. The code by itself does not establish that any particular symptom is present.

Possible causes of B1782

Possible areas to investigate include the mirror switch, wiring or connectors, the mirror actuator, or related control circuitry. These are possibilities, not confirmed causes.

How to diagnose B1782

  1. Check the vehicle-specific service information to confirm how B1782 is defined for that make and model.
  2. Confirm whether the passenger mirror’s upward adjustment works and note any other mirror-control symptoms.
  3. Have a qualified technician check for related diagnostic codes and inspect the relevant switch, wiring, and connectors.
  4. Use the vehicle-specific diagnostic procedure to determine whether the issue is in the control circuit, actuator, or another component.

How to fix B1782

Repair should follow the vehicle-specific test results. A technician may need to address a wiring or connector issue, switch, actuator, or control circuit; do not replace parts based on the code alone.

Can I drive with B1782?

The supplied reference does not establish a universal safety risk or driving restriction. If the mirror cannot be positioned to provide adequate visibility, avoid driving until visibility can be restored safely.

B1782 frequently asked questions

What does B1782 mean?

The supplied database describes B1782 as “Mirror Passenger Up Circuit Failure,” referring to a possible issue with the passenger mirror’s upward-adjustment circuit.

Does B1782 prove the mirror motor has failed?

No. The code does not identify a confirmed failed component. Diagnosis is needed to distinguish among possible circuit, switch, wiring, actuator, or control issues.

Can I drive with B1782?

The code alone does not determine whether driving is safe. Make sure the mirror provides adequate visibility; if it does not, avoid driving until that is addressed.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.