Source-backed diagnostic reference

B1790 Code: Meaning & Diagnostic Guide

Autolamp Sensor Input Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1790 mean?

  • OTHER: Autolamp Sensor Input Circuit Failure Source

B1790 quick answer

B1790 is listed as “Autolamp Sensor Input Circuit Failure.” It indicates a fault related to the automatic-light sensor input, but the exact meaning and diagnostic procedure can vary by vehicle.

Is B1790 generic or manufacturer-specific?

B1790 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1790 works in the vehicle

An autolamp system uses a sensor input to help control exterior lights automatically. “Input circuit failure” means the system has detected an issue with that input; the code alone does not confirm which part has failed.

B1790 symptoms

Depending on the vehicle and fault, automatic headlights may not turn on or off as expected, or an alert may appear. These symptoms are possibilities, not confirmed effects of B1790 on every vehicle.

Possible causes of B1790

Possible areas to check include the sensor, its wiring or connections, and related control-system circuitry. The supplied code description does not identify a confirmed cause or failed component.

How to diagnose B1790

  1. Confirm the vehicle’s make, model, year, and equipment, then check its service information for the applicable B1790 definition.
  2. Use a compatible scan tool to read stored codes and relevant system data; note any related codes before clearing anything.
  3. Check the sensor area and accessible wiring or connectors for visible damage, looseness, or obstruction, following vehicle-specific service guidance.
  4. Have a qualified technician test the circuit and sensor according to the vehicle’s diagnostic procedure before replacing parts.

How to fix B1790

Repair should follow the vehicle-specific test results. A damaged connection, wiring issue, sensor problem, or another circuit fault may need attention, but B1790 by itself does not establish which repair is appropriate.

Can I drive with B1790?

If automatic lighting is unreliable, use the manual light controls as appropriate and check that required lights are operating before driving. Consult the owner’s manual or a qualified technician if visibility or lighting is affected.

B1790 frequently asked questions

What does B1790 mean?

The supplied reference describes B1790 as “Autolamp Sensor Input Circuit Failure,” indicating an issue detected in an automatic-light sensor input circuit.

Does B1790 prove the autolamp sensor has failed?

No. The code description does not confirm a failed sensor; wiring, connections, or other circuit-related issues may also need to be checked.

Can B1790 have the same meaning on every vehicle?

Not necessarily. Confirm the definition and diagnostic procedure using service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.