Source-backed diagnostic reference

B1803 Code: Meaning & Diagnostic Guide

Lamp Turn Signal Rear Output Circuit Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1803 mean?

  • OTHER: Lamp Turn Signal Rear Output Circuit Open Source

B1803 quick answer

B1803 is listed as “Lamp Turn Signal Rear Output Circuit Open.” It indicates an open circuit in the rear turn-signal output path, but does not identify a confirmed failed part.

Is B1803 generic or manufacturer-specific?

B1803 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1803 works in the vehicle

An open circuit means electrical continuity may be interrupted somewhere along the path that supplies or controls the rear turn signal. The code description alone does not show where the interruption is or which component, if any, has failed.

B1803 symptoms

Depending on the vehicle and the fault, a rear turn signal may not light, may work intermittently, or may behave differently from the other side. These are possible signs, not symptoms confirmed by the code alone.

Possible causes of B1803

Possible causes include a loose or damaged connection, wiring damage, a lamp or socket issue, or a fault elsewhere in the output circuit. The code does not confirm any one cause.

How to diagnose B1803

  1. Check the vehicle-specific service information to confirm how B1803 is defined and which rear turn-signal output it refers to.
  2. With the vehicle safely parked, operate the turn signals and observe whether the rear lamps work consistently.
  3. Inspect accessible lamp connections and wiring for looseness or visible damage.
  4. Have a qualified technician test circuit continuity and control outputs if the cause is not apparent; use vehicle-specific procedures.

How to fix B1803

Repair should follow the test results and vehicle-specific service information. Correct any verified connection or wiring issue, or replace a component only when testing identifies it as faulty. Clear the code and recheck operation after the repair.

Can I drive with B1803?

Confirm that the rear turn signals work before driving. If they do not work reliably, limit driving and arrange diagnosis or repair; follow applicable local requirements.

B1803 frequently asked questions

Does B1803 identify a failed rear turn-signal lamp?

No. It describes an open rear turn-signal output circuit, but does not identify a specific failed part.

What does “open circuit” mean?

It means electrical continuity may be interrupted somewhere in the circuit.

Can the code alone identify which side is affected?

Not from the supplied description. Check vehicle-specific service information and test the circuit.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.