B1806 Code: Meaning & Diagnostic Guide
Lamp Tail Output Circuit Failure
What does B1806 mean?
- OTHER: Lamp Tail Output Circuit Failure Source
B1806 quick answer
B1806 is a body-system diagnostic trouble code meaning “Lamp Tail Output Circuit Failure.” It indicates a problem detected in the circuit that controls or supplies power to the tail lamps; it does not identify a confirmed failed part.
Is B1806 generic or manufacturer-specific?
B1806 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B1806 works in the vehicle
In plain terms, the vehicle’s control system has detected an issue with the electrical path for the tail lamps. The exact detection method and circuit design can vary by vehicle, so consult vehicle-specific service information before diagnosing the code.
B1806 symptoms
Depending on the vehicle and the underlying issue, tail lamps may be inoperative, dim, intermittent, or behave unexpectedly. The code may also be stored without an obvious lighting symptom.
Possible causes of B1806
Possible causes include a lamp problem, a blown fuse, damaged wiring, a poor electrical connection, or a control-circuit fault. B1806 alone does not confirm which, if any, of these is responsible.
How to diagnose B1806
- Record the code and any related codes before clearing anything.
- Check whether the tail lamps work normally and note any intermittent behavior.
- Use vehicle-specific service information to identify the relevant fuses, wiring, connectors, and diagnostic procedure.
- With the vehicle safely parked, visually check accessible lamp housings and wiring for obvious damage or loose connections.
- Have a qualified technician test the circuit and control system if the cause is not clear; avoid replacing parts based only on the code.
How to fix B1806
Repair or replace only the component or connection confirmed to be faulty, following the vehicle’s service information. After repair, clear the code as directed and verify that the tail lamps operate correctly and the code does not return.
Can I drive with B1806?
If the tail lamps are not working or their operation is unreliable, avoid driving in conditions where other road users may not see the vehicle clearly. Arrange prompt inspection; if the lamps work normally, have the code checked rather than assuming it is harmless.
B1806 frequently asked questions
What does B1806 mean?
B1806 means “Lamp Tail Output Circuit Failure.” It points to a detected issue in the tail-lamp electrical circuit, not to a specific confirmed failed part.
Does B1806 identify which component is faulty?
No. Further checks using vehicle-specific service information are needed to find the cause.
Can I drive with B1806?
That depends on whether the tail lamps work reliably and on driving conditions. If they do not work correctly, avoid driving until the lighting issue is addressed.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.