Source-backed diagnostic reference

B1822 Code: Meaning & Diagnostic Guide

Wiper Rear Park Sense Input Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1822 mean?

  • OTHER: Wiper Rear Park Sense Input Circuit Failure Source

B1822 quick answer

B1822 is listed as “Wiper Rear Park Sense Input Circuit Failure.” It indicates a detected problem with the rear wiper’s park-sense signal circuit; it does not, by itself, identify a failed part.

Is B1822 generic or manufacturer-specific?

B1822 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1822 works in the vehicle

The park-sense input tells the vehicle when the rear wiper has returned to its resting position. “Circuit failure” describes an electrical signal or circuit issue, not a confirmed cause. Code definitions and diagnostic procedures may vary by vehicle, so check the service information for the specific model.

B1822 symptoms

Depending on the vehicle and the underlying issue, the rear wiper might stop in the wrong position, operate inconsistently, or not work as expected. The code alone does not confirm any of these symptoms.

Possible causes of B1822

Possible areas to investigate include wiring or connector problems, the park-sense component, or related wiper motor or control circuitry. These are possibilities, not confirmed causes.

How to diagnose B1822

  1. Confirm the exact B1822 definition and diagnostic procedure using service information for the vehicle.
  2. Check whether the rear wiper has observable operating or parking problems, and note when they occur.
  3. Inspect accessible wiring and connectors for visible damage, looseness, or corrosion.
  4. Have a qualified technician test the park-sense signal and related circuit components using the vehicle-specific procedure.
  5. Recheck for the code after any repair to confirm whether the issue has been resolved.

How to fix B1822

Choose repairs only after diagnosis identifies the cause. Depending on test results, the repair may involve a connection, wiring, or a related wiper component. Avoid replacing parts based on the code alone.

Can I drive with B1822?

The code alone does not establish whether the vehicle is safe to drive. Consider whether a nonworking rear wiper affects visibility in current conditions, and consult a qualified technician if operation is unreliable.

B1822 frequently asked questions

What does B1822 mean?

It is listed as a rear wiper park-sense input circuit failure, meaning the vehicle detected a problem with the signal that indicates the wiper’s resting position.

Does B1822 prove the rear wiper motor has failed?

No. The code identifies a circuit or signal issue but does not confirm which component, if any, has failed.

Can I diagnose B1822 without vehicle-specific information?

A basic visual check may reveal an obvious wiring or connector problem, but accurate testing requires the diagnostic information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.