Source-backed diagnostic reference

B1823 Code: Meaning & Diagnostic Guide

Wiper Rear Park Sense Input Circuit Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1823 mean?

  • OTHER: Wiper Rear Park Sense Input Circuit Open Source

B1823 quick answer

B1823 is listed as “Wiper Rear Park Sense Input Circuit Open.” It indicates an open circuit in the rear wiper park-sense input, but does not by itself identify a failed part.

Is B1823 generic or manufacturer-specific?

B1823 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1823 works in the vehicle

This is a body-system diagnostic trouble code. “Park sense” refers to the signal used to detect when the rear wiper is in its parked position. “Circuit open” means the signal path may be interrupted; the code alone does not confirm where or why.

B1823 symptoms

Depending on the vehicle, the rear wiper may not operate as expected, stop in the wrong position, or fail to park. A stored code may also appear without an obvious symptom.

Possible causes of B1823

Possibilities include damaged or disconnected wiring, a poor connector contact, or a problem in a component or circuit involved in the park-sense signal. Vehicle-specific testing is needed to narrow this down.

How to diagnose B1823

  1. Confirm the code and check for other stored codes using a compatible scan tool.
  2. Look up the vehicle-specific service information and wiring diagram for B1823.
  3. Check accessible rear-wiper wiring and connectors for visible damage, disconnection, or corrosion.
  4. Have a qualified technician test the park-sense circuit according to the vehicle’s service procedure before replacing parts.

How to fix B1823

Repair should follow the vehicle-specific test results. A wiring or connector issue may need attention, but do not replace the rear wiper motor or another component based on B1823 alone.

Can I drive with B1823?

This code concerns the rear wiper circuit, not vehicle propulsion. If rear visibility is reduced in rain or other conditions, avoid driving until visibility is adequate; otherwise, consult the vehicle’s manual or a qualified technician for guidance.

B1823 frequently asked questions

What does B1823 mean?

It is listed as a rear wiper park-sense input circuit open code. It identifies a circuit condition, not a confirmed failed component.

Does B1823 mean the rear wiper motor has failed?

No. The code alone does not confirm motor failure. Wiring, connectors, or other parts of the park-sense circuit may need to be checked.

Can I diagnose B1823 without vehicle-specific information?

You can confirm the code and inspect accessible wiring, but the correct circuit tests depend on the vehicle’s service information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.