Source-backed diagnostic reference

B1824 Code: Meaning & Diagnostic Guide

Wiper Rear Park Sense Input Circuit Short To Battery

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1824 mean?

  • OTHER: Wiper Rear Park Sense Input Circuit Short To Battery Source

B1824 quick answer

B1824 is a body-system diagnostic trouble code for a rear wiper park-sense input circuit short to battery. It indicates that the circuit may be registering battery voltage where it is not expected; the code alone does not identify a failed part.

Is B1824 generic or manufacturer-specific?

B1824 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1824 works in the vehicle

The park-sense input helps indicate the rear wiper's parked position. “Short to battery” means the circuit appears electrically connected to battery voltage unexpectedly. The exact circuit design and diagnostic procedure can vary by vehicle.

B1824 symptoms

Depending on the vehicle and the underlying issue, the rear wiper might not park correctly, behave unpredictably, or show no obvious symptom. These possibilities are not confirmed by the code alone.

Possible causes of B1824

Possible causes may include damaged wiring, a poor or contaminated connector, or a problem elsewhere in the circuit. B1824 does not confirm any particular cause or failed component.

How to diagnose B1824

  1. Confirm B1824 with a scan tool and note any other stored codes or relevant symptoms.
  2. Use service information for the specific vehicle to identify the rear wiper park-sense circuit and its expected readings.
  3. With the vehicle safely powered down as directed by its service information, inspect accessible related wiring and connectors for visible damage, corrosion, or looseness.
  4. Have a qualified technician test the circuit and related components using the vehicle-specific procedure before replacing parts.

How to fix B1824

Repair or replace only the wiring, connector, or component found faulty during diagnosis, following vehicle-specific service information. Clear the code and verify operation afterward. The supplied information does not establish a particular repair.

Can I drive with B1824?

The code alone does not establish whether the vehicle is safe or unsafe to drive. If rear-window visibility is reduced, avoid driving in conditions where you depend on it until visibility is adequate; consult a qualified technician if the wiper behaves unpredictably.

B1824 frequently asked questions

What does B1824 mean?

It describes a short-to-battery condition in the rear wiper park-sense input circuit.

Does B1824 identify a failed rear wiper motor?

No. The code points to a circuit condition and does not by itself confirm that the motor or any other component has failed.

Can I diagnose B1824 without vehicle-specific information?

A general inspection may reveal visible wiring or connector damage, but circuit testing should use service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.