B1829 Code: Meaning & Diagnostic Guide
Wiper Rear High Limit Input Circuit Short To Ground
What does B1829 mean?
- OTHER: Wiper Rear High Limit Input Circuit Short To Ground Source
B1829 quick answer
B1829 is defined as “Wiper Rear High Limit Input Circuit Short To Ground.” It indicates that the rear-wiper high-limit input circuit is being reported as shorted to ground; it does not, by itself, identify a failed part.
Is B1829 generic or manufacturer-specific?
B1829 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B1829 works in the vehicle
A circuit “short to ground” means an electrical signal may be connected to ground where it should not be, or the system is detecting that condition. “High limit input” refers to an input used by the vehicle’s rear-wiper control system. The exact circuit design and diagnostic meaning can vary by vehicle.
B1829 symptoms
Depending on the vehicle and the underlying issue, the rear wiper might not work, work intermittently, or behave unexpectedly. The code alone does not confirm any particular symptom.
Possible causes of B1829
Possible causes include damaged wiring, a poor or corroded connector, or a problem with an input or control component. These are possibilities only; the code does not establish which component, if any, has failed.
How to diagnose B1829
- Confirm the code with a compatible diagnostic tool and note any other stored codes.
- Look up B1829 in service information for the specific vehicle, including its wiring diagram and test procedure.
- Check for visible damage, loose connections, or corrosion in accessible rear-wiper wiring and connectors.
- Have a qualified technician test the circuit according to vehicle-specific procedures before replacing parts.
How to fix B1829
Repair or replace only the wiring, connection, or component confirmed faulty by testing. Because circuit layouts differ by vehicle, use vehicle-specific service information or seek help from a qualified technician rather than replacing parts based on the code alone.
Can I drive with B1829?
B1829 does not establish whether the vehicle is safe or unsafe to drive. If the rear wiper is needed for clear visibility and is not working properly, avoid driving in conditions where rear visibility is inadequate until the issue is addressed.
B1829 frequently asked questions
Does B1829 mean the rear-wiper motor has failed?
No. The code describes a rear-wiper high-limit input circuit short to ground; it does not identify the motor or confirm a failed component.
Can I clear B1829 without repairing anything?
Clearing the code may remove its stored record temporarily, but it does not address an underlying circuit issue. Check whether it returns after appropriate diagnosis.
Is B1829 the same on every vehicle?
The supplied definition is “Wiper Rear High Limit Input Circuit Short To Ground,” but circuit details and diagnostic procedures can vary by vehicle.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.