B1904 Code: Meaning & Diagnostic Guide
Air Bag Crash Sensor #2 Feed/Return Circuit Failure
What does B1904 mean?
- OTHER: Air Bag Crash Sensor #2 Feed/Return Circuit Failure Source
B1904 quick answer
B1904 is listed as an air-bag crash sensor #2 feed/return circuit failure. The exact meaning and diagnostic procedure can vary by vehicle.
Is B1904 generic or manufacturer-specific?
B1904 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B1904 works in the vehicle
The feed/return circuit carries electrical signals to or from a crash sensor. This code indicates a reported circuit fault; by itself, it does not confirm that the sensor has failed.
B1904 symptoms
Depending on the vehicle, the air-bag warning light may be on or the restraint system may store a fault. Some vehicles may show no obvious symptom.
Possible causes of B1904
Possible causes include a wiring or connector issue, a power or ground problem, or a sensor or control-system fault. The code alone does not identify the cause.
How to diagnose B1904
- Confirm the code with a scan tool and record any related codes and warning-light behavior.
- Check vehicle-specific service information for the correct B1904 definition and diagnostic procedure.
- Have a qualified technician inspect the relevant circuit and connectors using approved air-bag system procedures.
- Verify the repair by clearing codes and rechecking the system with appropriate diagnostic equipment.
How to fix B1904
Repair depends on the test results and vehicle-specific information. Air-bag systems contain safety-critical components; do not probe, disconnect, or repair their wiring without the required training and procedures.
Can I drive with B1904?
B1904 may indicate a restraint-system fault, but the code alone cannot establish how the vehicle will respond in a crash. Arrange a prompt assessment by a qualified technician and follow the vehicle manual's guidance.
B1904 frequently asked questions
Does B1904 prove the crash sensor is bad?
No. It identifies a reported feed/return circuit fault, not a confirmed failed sensor.
Can B1904 mean different things on different vehicles?
Yes. Check vehicle-specific service information to confirm the definition and test procedure.
Can I repair the B1904 circuit myself?
Air-bag circuits require approved safety procedures. Have a qualified technician diagnose and repair the system.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.