B1905 Code: Meaning & Diagnostic Guide
Air Bag Crash Sensor #2 Feed/Return Circuit Short To Battery
What does B1905 mean?
- OTHER: Air Bag Crash Sensor #2 Feed/Return Circuit Short To Battery Source
B1905 quick answer
B1905 is listed as an airbag crash sensor #2 feed/return circuit short to battery. It indicates a detected electrical fault in that circuit, but does not by itself confirm which component has failed.
Is B1905 generic or manufacturer-specific?
B1905 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B1905 works in the vehicle
In plain language, the vehicle has detected voltage where the crash sensor circuit is not expected to have it. “Feed/return” refers to the circuit’s electrical paths. The code description is generic and does not establish which makes or models use this definition.
B1905 symptoms
The airbag warning light may be on, and the restraint system may have limited or uncertain operation. A stored code may also have no obvious symptom. These are possibilities, not confirmed effects for every vehicle.
Possible causes of B1905
Possible causes include damaged wiring, a poor connection, a short to a power source, or a sensor or control-module circuit fault. The code alone cannot identify the cause or confirm a failed part.
How to diagnose B1905
- Confirm the exact code and any accompanying codes with a compatible diagnostic scan tool.
- Check the vehicle-specific service information to verify the code definition and applicable diagnostic procedure.
- Have a qualified technician inspect the restraint-system wiring and connectors using the manufacturer’s safety procedures.
- Use the prescribed diagnostic tests to isolate the circuit fault before replacing any parts.
How to fix B1905
Repair depends on the diagnosed cause. Airbag circuits require specialized handling; do not probe, jumper, or repair them without the correct training and vehicle-specific procedure. Have a qualified technician complete the repair and verify the code and restraint-system operation afterward.
Can I drive with B1905?
If the airbag warning light is on, treat airbag protection as uncertain and arrange prompt professional diagnosis. Consult the vehicle owner’s manual; if there are other warnings or concerns, avoid driving and seek assistance.
B1905 frequently asked questions
What does B1905 mean?
It is described as an airbag crash sensor #2 feed/return circuit short to battery. The code identifies a circuit fault, not a confirmed failed component.
Does B1905 mean the crash sensor must be replaced?
No. Wiring, connections, or other circuit components may also be involved. Diagnosis is needed before replacing parts.
Can I clear B1905 and keep driving?
Clearing the code does not establish that the fault is fixed or that the restraint system is operating correctly. Follow the owner’s manual and arrange qualified diagnosis, especially if the airbag warning light is on.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.