Source-backed diagnostic reference

B1931 Code: Meaning & Diagnostic Guide

Air Bag Crash Sensor #1 Feed/Return Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1931 mean?

  • OTHER: Air Bag Crash Sensor #1 Feed/Return Circuit Failure Source

B1931 quick answer

B1931 is described as an air bag crash sensor #1 feed/return circuit failure. It points to a problem in the circuit’s power or return path, but does not by itself confirm that the sensor has failed.

Is B1931 generic or manufacturer-specific?

B1931 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1931 works in the vehicle

A feed/return circuit carries power to a component and provides its electrical return path. B1931 is an SRS (airbag system) diagnostic code; its exact meaning and diagnostic procedure may vary by vehicle.

B1931 symptoms

Depending on the vehicle, the airbag warning light may be on or an SRS fault message may appear. The code alone does not establish which symptoms are present or whether an airbag would deploy.

Possible causes of B1931

Possible causes include a wiring or connector issue, a problem with the feed or return circuit, or a sensor fault. These are possibilities, not confirmed failures; vehicle-specific diagnosis is needed.

How to diagnose B1931

  1. Confirm the exact code and any accompanying SRS codes using a scan tool that can read the vehicle’s airbag system.
  2. Check the vehicle’s service information for the code definition and approved diagnostic procedure.
  3. Have a qualified technician assess the sensor circuit, connectors, wiring, and sensor as directed by that procedure.
  4. Do not probe, disconnect, or repair SRS wiring unless qualified and following the vehicle-specific safety instructions.

How to fix B1931

The repair depends on the cause confirmed during diagnosis. Avoid replacing the sensor based on B1931 alone; have a qualified technician perform SRS testing and repairs using vehicle-specific procedures.

Can I drive with B1931?

Because B1931 concerns the airbag system, consult the owner’s manual and arrange prompt assessment by a qualified technician. The code alone cannot determine the vehicle’s crash-protection status or whether it is safe to drive.

B1931 frequently asked questions

What does code B1931 mean?

It is described as an air bag crash sensor #1 feed/return circuit failure, indicating a circuit fault rather than confirming a specific failed part.

Does B1931 prove the crash sensor is bad?

No. Wiring, connectors, or the feed/return path may also be involved. Vehicle-specific testing is needed to identify the cause.

Can I diagnose or repair B1931 myself?

SRS circuits require special precautions. Do not probe or repair them unless you are qualified and following the vehicle’s service instructions.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.