Source-backed diagnostic reference

B1941 Code: Meaning & Diagnostic Guide

Air Bag Crash Sensor #1 Feed/Return Circuit Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1941 mean?

  • OTHER: Air Bag Crash Sensor #1 Feed/Return Circuit Open Source

B1941 quick answer

B1941 is listed in the supplied reference as “Air Bag Crash Sensor #1 Feed/Return Circuit Open.” It indicates a reported open circuit in that sensor’s feed/return path; the code alone does not identify the failed part or confirm the cause.

Is B1941 generic or manufacturer-specific?

B1941 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1941 works in the vehicle

An open circuit means the electrical path is interrupted or the expected connection is not detected. “Feed/return” describes the circuit path, and “#1” is the sensor designation used by the code reference. The reference does not establish which vehicles or manufacturers use this definition.

B1941 symptoms

Depending on the vehicle and system, an airbag warning light or a stored fault may be present. The code does not by itself confirm that an airbag has deployed, that a specific component has failed, or that every restraint feature is unavailable.

Possible causes of B1941

Possible areas to investigate include a loose or damaged connection, wiring damage, corrosion, or a problem elsewhere in the circuit. These are possibilities, not confirmed causes; B1941 alone does not prove the crash sensor is faulty.

How to diagnose B1941

  1. Confirm the exact code and any accompanying codes with a compatible diagnostic tool; definitions can vary by vehicle.
  2. Use vehicle-specific service information to identify the applicable circuit and approved test procedure.
  3. Have a qualified technician inspect accessible wiring and connectors for visible damage or poor connections.
  4. Ask a qualified technician to perform any further airbag-system diagnosis using the vehicle maker’s safety procedures.

How to fix B1941

Repair should follow vehicle-specific diagnostic findings. Do not replace the sensor based on the code alone. Airbag circuits can be hazardous; avoid probing, disconnecting, or repairing them yourself and use a qualified technician.

Can I drive with B1941?

The code alone cannot determine whether the vehicle is safe to drive or which restraint functions remain available. Arrange prompt professional diagnosis, and consult the vehicle owner’s manual or a qualified technician for vehicle-specific guidance.

B1941 frequently asked questions

What does B1941 mean?

The supplied reference defines B1941 as “Air Bag Crash Sensor #1 Feed/Return Circuit Open,” indicating a reported interruption in that circuit.

Does B1941 prove the crash sensor has failed?

No. It identifies a circuit condition, not a confirmed failed component. Wiring, connections, or other parts of the circuit may need investigation.

Can I diagnose or repair B1941 myself?

Airbag circuits require specific safety procedures. Avoid probing or repairing them yourself; have a qualified technician diagnose the code using vehicle-specific information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.