Source-backed diagnostic reference

B1950 Code: Meaning & Diagnostic Guide

Seat Rear Up/Down Potentiometer Feedback Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1950 mean?

  • OTHER: Seat Rear Up/Down Potentiometer Feedback Circuit Failure Source

B1950 quick answer

B1950 is listed in the supplied reference as a seat rear up/down potentiometer feedback circuit failure. The exact meaning and diagnostic procedure can vary by vehicle, so confirm it in vehicle-specific service information.

Is B1950 generic or manufacturer-specific?

B1950 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1950 works in the vehicle

A potentiometer is a position sensor. In this context, it may provide feedback about the rear vertical position of a seat. The code description points to a problem with that feedback circuit; it does not, by itself, confirm that the sensor or any other part has failed.

B1950 symptoms

Possible symptoms may include rear seat height adjustment that does not work, behaves inconsistently, or does not match the seat’s actual position. A warning light or message may also appear, depending on the vehicle.

Possible causes of B1950

Possible explanations include a problem with the position sensor, its wiring or connectors, or another part of the vehicle’s seat control system. These are possibilities, not confirmed causes; vehicle-specific testing is needed.

How to diagnose B1950

  1. Check the vehicle-specific code definition and service information for B1950.
  2. Use a suitable scan tool to record related codes and note when the code returns.
  3. Check whether the rear seat height adjustment operates normally and consistently.
  4. With the vehicle powered down as specified by its service information, visually inspect accessible seat wiring and connectors for looseness or damage.
  5. Have a qualified technician test the feedback circuit using the vehicle’s wiring diagram and specifications.

How to fix B1950

Base any repair on test results rather than replacing a part solely because B1950 is stored. Repair or replace only the component or wiring identified by vehicle-specific diagnosis, then verify operation and follow any required relearn procedure.

Can I drive with B1950?

Driving guidance depends on whether the seat can be positioned and remains secure enough for a safe driving position. If it cannot, avoid driving until the issue is assessed. Consult the vehicle manual or a qualified technician for vehicle-specific advice.

B1950 frequently asked questions

Does B1950 prove the seat potentiometer has failed?

No. The supplied description identifies a feedback circuit issue, but the code alone does not confirm which part, if any, has failed.

Can B1950 have different meanings on different vehicles?

Yes. Confirm the definition and test procedure using information for the specific vehicle.

Can I keep driving with B1950?

It depends on whether the seat can be placed and held in a safe driving position. If not, avoid driving until it is checked.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.