Source-backed diagnostic reference

B1957 Code: Meaning & Diagnostic Guide

Seat Front Up/Down Potentiometer Feedback Circuit Short To Ground

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1957 mean?

  • OTHER: Seat Front Up/Down Potentiometer Feedback Circuit Short To Ground Source

B1957 quick answer

B1957 is listed as a body-system code for a short to ground in the front seat up/down potentiometer feedback circuit. The code alone does not identify the failed part or confirm that every vehicle uses the same definition.

Is B1957 generic or manufacturer-specific?

B1957 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1957 works in the vehicle

A potentiometer is a position sensor that provides feedback about seat movement. “Short to ground” means the circuit may be unintentionally connected to electrical ground, but the code by itself does not prove where the fault is.

B1957 symptoms

Depending on the vehicle and the fault, the front seat may move incorrectly, fail to move up or down, or operate intermittently. Some vehicles may show a warning or store the code without an obvious symptom.

Possible causes of B1957

Possible areas to investigate include wiring or connectors in the seat-position feedback circuit, the potentiometer, or related control circuitry. These are possibilities, not confirmed causes.

How to diagnose B1957

  1. Check the vehicle’s service information to confirm the B1957 definition and diagnostic procedure for that specific make, model, and year.
  2. Record any other stored codes and note which seat functions are affected.
  3. Have a qualified technician inspect the relevant wiring and connectors for damage, looseness, or signs of corrosion.
  4. Use the vehicle-specific procedure to test the feedback circuit and sensor before deciding whether a component needs replacement.

How to fix B1957

The repair depends on test results and the vehicle-specific procedure. Avoid replacing the seat sensor or control module based on the code alone; have the circuit diagnosed by a qualified technician.

Can I drive with B1957?

B1957 alone does not establish whether the vehicle is safe to drive. If the seat is loose, cannot be secured in a suitable driving position, or interferes with vehicle control, do not drive until it has been assessed.

B1957 frequently asked questions

Does B1957 confirm that the seat potentiometer has failed?

No. The code description points to a short-to-ground condition in the feedback circuit, but diagnosis is needed to identify the cause.

What does “short to ground” mean?

It means an electrical circuit may be making an unintended connection to ground. The code does not say exactly where that connection is.

Can I clear B1957 without repairing anything?

Clearing the code may remove the stored record temporarily, but it does not correct an underlying fault. Follow the vehicle-specific diagnostic procedure.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.