Source-backed diagnostic reference

B1979 Code: Meaning & Diagnostic Guide

Passenger Seat Rearward Switch Circuit Short to Battery

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B1979 mean?

  • OTHER: Passenger Seat Rearward Switch Circuit Short to Battery Source

B1979 quick answer

B1979 is listed as “Passenger Seat Rearward Switch Circuit Short to Battery.” It indicates a possible electrical fault in the passenger-seat rearward switch circuit; it does not by itself confirm which part has failed.

Is B1979 generic or manufacturer-specific?

B1979 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B1979 works in the vehicle

B1979 is a body-system diagnostic trouble code in the supplied reference. “Short to battery” means the circuit may be receiving battery voltage where it is not expected. Code definitions and diagnostic procedures can vary by vehicle, so check the vehicle-specific service information.

B1979 symptoms

Depending on the vehicle and the underlying issue, the passenger seat may not move rearward, may behave inconsistently, or the code may appear without an obvious symptom.

Possible causes of B1979

Possibilities include damaged or pinched wiring, a poor or damaged connector, a switch fault, or another issue in the seat circuit. The code alone does not establish a failed component.

How to diagnose B1979

  1. Confirm the code with a suitable scan tool and record any related codes.
  2. Check the vehicle-specific service information for the exact B1979 definition and diagnostic procedure.
  3. Note whether the passenger seat moves normally and whether the issue changes when the switch is used.
  4. Have a qualified technician inspect the switch, connectors, and accessible wiring for damage or poor connections.
  5. Use the manufacturer’s diagnostic procedure to identify the fault before replacing parts.

How to fix B1979

The repair depends on the confirmed cause. A technician may need to repair wiring or a connector, address a switch fault, or investigate another part of the circuit. Do not replace components based on the code alone. Avoid working on electrical systems unless qualified, and follow vehicle-specific safety procedures.

Can I drive with B1979?

B1979 alone does not establish whether the vehicle is safe or unsafe to drive. If the passenger seat is loose, moves unexpectedly, or obstructs the driver, have the vehicle assessed before driving; otherwise, arrange diagnosis according to the symptoms and vehicle guidance.

B1979 frequently asked questions

What does B1979 mean?

The supplied reference describes B1979 as “Passenger Seat Rearward Switch Circuit Short to Battery,” indicating a possible electrical fault in that circuit.

Does B1979 mean the seat switch has failed?

No. The code identifies a circuit condition, not a confirmed failed part. Wiring, connectors, the switch, or another circuit issue may need investigation.

Can I keep driving with B1979?

The code alone does not determine whether driving is safe. Consider how the seat behaves and seek assessment if it is loose, moves unexpectedly, or interferes with driving.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.