B2187 Code: Meaning & Diagnostic Guide
Rear Wiper Select Switch "B" Short to Ground
What does B2187 mean?
- OTHER: Rear Wiper Select Switch "B" Short to Ground Source
B2187 quick answer
B2187 is listed in the supplied code reference as “Rear Wiper Select Switch ‘B’ Short to Ground.” The meaning and diagnostic procedure may vary by vehicle, so confirm it with the vehicle’s service information.
Is B2187 generic or manufacturer-specific?
B2187 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B2187 works in the vehicle
“Short to ground” means an electrical circuit may be connected to ground where it should not be. The code description points to the rear wiper select-switch circuit, but it does not by itself confirm a failed switch or identify the cause.
B2187 symptoms
Depending on the vehicle and fault, the rear wiper may not operate as selected, may behave unexpectedly, or the code may be stored without an obvious symptom.
Possible causes of B2187
Possible causes to investigate include a wiring or connector problem, an electrical short, or a switch-circuit fault. The supplied reference does not establish a specific cause or failed component.
How to diagnose B2187
- Confirm that B2187 applies to the vehicle using its year, make, model, and service information.
- Check for other stored codes and note any rear-wiper symptoms.
- Using the vehicle-specific diagnostic procedure, inspect the relevant switch wiring and connectors for visible damage, corrosion, or loose connections.
- Have a qualified technician test the circuit and switch as specified by the manufacturer before replacing parts.
How to fix B2187
Repair or replace only the part or wiring confirmed faulty by vehicle-specific testing. Clear the code and verify rear-wiper operation afterward. Do not replace the switch based on B2187 alone.
Can I drive with B2187?
The code alone does not establish whether the vehicle is safe or unsafe to drive. If rear-wiper operation is needed for visibility in current conditions, avoid driving until visibility is adequate or the issue is assessed.
B2187 frequently asked questions
What does B2187 mean?
The supplied reference describes B2187 as “Rear Wiper Select Switch ‘B’ Short to Ground.” Confirm the definition for your specific vehicle.
Does B2187 prove the rear wiper switch has failed?
No. The code identifies a circuit condition, not a confirmed failed component. Testing is needed to locate the cause.
Can I keep driving with B2187?
The code alone does not determine drive safety. Consider whether a rear-wiper problem affects visibility in the conditions you will encounter.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.