Source-backed diagnostic reference

B2316 Code: Meaning & Diagnostic Guide

Mirror Passenger Vertical Feedback Potentiometer Circuit Failure

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B2316 mean?

  • OTHER: Mirror Passenger Vertical Feedback Potentiometer Circuit Failure Source

B2316 quick answer

B2316 is listed as a passenger-side mirror vertical feedback potentiometer circuit failure. The code points to a possible problem in the mirror’s position-feedback circuit, but it does not by itself confirm which part has failed.

Is B2316 generic or manufacturer-specific?

B2316 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B2316 works in the vehicle

A feedback potentiometer is a sensor that reports a mirror’s position. “Vertical” refers to up-and-down movement, and “circuit failure” means the vehicle detected an electrical reading outside the expected range. The code description alone does not establish vehicle-specific applicability or identify a confirmed failed component.

B2316 symptoms

Depending on the vehicle and system, the passenger-side mirror might not move up or down as expected, might move inconsistently, or might not retain or report its position correctly. Some vehicles may show no obvious symptom.

Possible causes of B2316

Possibilities include a fault in the mirror’s position sensor, wiring or connectors, or the mirror control system. The code alone cannot distinguish among these possibilities.

How to diagnose B2316

  1. Confirm that B2316 is supported by the vehicle and check the manufacturer’s service information for its exact meaning and test procedure.
  2. Note any mirror movement problems and check whether other mirror functions are affected.
  3. Have a qualified technician inspect the mirror wiring and connectors for visible damage, looseness, or corrosion.
  4. Test the feedback circuit and related components using the vehicle-specific diagnostic procedure before replacing parts.

How to fix B2316

Repair or replacement should depend on test results and vehicle-specific service information. Avoid replacing the mirror or sensor based only on the code.

Can I drive with B2316?

If the mirror cannot be positioned to provide a clear view, arrange a prompt inspection and use appropriate caution. The code alone does not determine whether the vehicle is safe to drive.

B2316 frequently asked questions

What does B2316 mean?

It is described as a passenger-side mirror vertical feedback potentiometer circuit failure, indicating a possible issue with the circuit that reports the mirror’s up-and-down position.

Does B2316 prove the mirror sensor has failed?

No. Wiring, connectors, the sensor, or the control system may be involved; diagnosis is needed to identify the cause.

Can I keep driving with B2316?

The code alone cannot determine that. If the mirror cannot be adjusted for a clear view, have the issue assessed promptly and use caution.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.