B2319 Code: Meaning & Diagnostic Guide
Mirror Passenger Vertical Feedback Potentiometer Circuit Short to Ground
What does B2319 mean?
- OTHER: Mirror Passenger Vertical Feedback Potentiometer Circuit Short to Ground Source
B2319 quick answer
B2319 is described as a passenger-side mirror vertical feedback potentiometer circuit short to ground. It points to an electrical signal problem in the mirror-position feedback circuit, but does not by itself confirm which part has failed.
Is B2319 generic or manufacturer-specific?
B2319 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B2319 works in the vehicle
A feedback potentiometer is a position sensor that helps report how far the mirror is tilted vertically. “Short to ground” means the circuit may be connected to ground where it should not be, or its signal may otherwise be pulled too low. The exact circuit and diagnostic procedure can vary by vehicle.
B2319 symptoms
Depending on the vehicle and the fault, the passenger mirror may not tilt up or down as commanded, may move unpredictably, or may operate normally while the code is stored. These are possibilities, not guaranteed symptoms.
Possible causes of B2319
Possible causes include damaged or grounded wiring, a loose or corroded connector, a problem in the mirror’s position-sensing or adjustment assembly, or a control-circuit issue. The code alone does not establish a failed component.
How to diagnose B2319
- Confirm the code with a scan tool and record any other codes or relevant vehicle symptoms.
- Check vehicle-specific service information to confirm how B2319 is defined and which circuit it monitors.
- Visually inspect accessible mirror wiring and connectors for damage, corrosion, looseness, or signs of pinching.
- Have a qualified technician test the circuit and related components using the vehicle-specific diagnostic procedure before replacing parts.
How to fix B2319
Repair or replace only the wiring, connector, mirror assembly, or other component that testing identifies as faulty. Because code definitions and procedures can differ, use information for the specific vehicle. Do not replace parts based on the code description alone.
Can I drive with B2319?
The code alone does not determine whether the vehicle is safe to drive. If the passenger mirror cannot be positioned to provide adequate visibility, address that before driving; otherwise, arrange diagnosis if the fault persists.
B2319 frequently asked questions
Does B2319 confirm that the passenger mirror is faulty?
No. It identifies a problem described in the mirror’s vertical-position feedback circuit, but wiring, connectors, the mirror assembly, or a control circuit may be involved.
Can B2319 affect mirror adjustment?
It may. The mirror might not move vertically as commanded, but symptoms vary by vehicle and the specific fault.
Can I clear B2319 without repairing anything?
Clearing the code does not repair the circuit. If the underlying issue remains, the code may return.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.