Source-backed diagnostic reference

B2326 Code: Meaning & Diagnostic Guide

Mirror Driver Vertical Feedback Potentiometer Circuit Short to Battery

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B2326 mean?

  • OTHER: Mirror Driver Vertical Feedback Potentiometer Circuit Short to Battery Source

B2326 quick answer

B2326 means the vertical feedback potentiometer circuit for a mirror driver has been detected as shorted to battery voltage. The code identifies a circuit condition; it does not by itself confirm which part has failed.

Is B2326 generic or manufacturer-specific?

B2326 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B2326 works in the vehicle

A feedback potentiometer is a position sensor that reports movement or position to a control system. “Short to battery” means the circuit signal was detected at an unexpectedly high voltage or connected to battery voltage. The exact detection criteria can vary by vehicle.

B2326 symptoms

Depending on the vehicle and system, a related mirror may move incorrectly, stop responding, or fail to report its position accurately. B2326 alone does not establish that any of these symptoms are present.

Possible causes of B2326

Possible causes include damaged wiring, a poor or contaminated connector, a problem with the potentiometer or mirror assembly, or a control-system issue. The code alone does not identify the cause.

How to diagnose B2326

  1. Confirm the code and note any other stored codes or related symptoms.
  2. Use vehicle-specific service information to identify the circuit and its test procedure.
  3. With the vehicle safely powered down as specified by the service procedure, inspect accessible connectors and wiring for damage, moisture, corrosion, or loose connections.
  4. Have a qualified technician test the circuit and compare sensor readings with the manufacturer’s specifications.
  5. After any verified repair, clear the code and check whether it returns during an appropriate function test.

How to fix B2326

Repair should be based on circuit testing rather than replacing a part based on B2326 alone. A qualified technician can determine whether wiring, a connector, the feedback sensor or mirror assembly, or another circuit component needs attention.

Can I drive with B2326?

If the mirror cannot be adjusted or does not provide adequate visibility, avoid driving until visibility can be maintained safely. Otherwise, consult a qualified technician and follow the vehicle’s owner guidance.

B2326 frequently asked questions

Does B2326 prove the mirror motor has failed?

No. It identifies a detected circuit condition, not a confirmed failed component. Testing is needed to locate the cause.

What does “short to battery” mean in B2326?

It means the feedback circuit was detected at a voltage consistent with battery voltage when that was not expected.

Can I keep driving with B2326?

That depends on whether mirror visibility is affected. Do not drive if you cannot maintain adequate visibility; seek diagnosis if the mirror does not work properly.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.