B2346 Code: Meaning & Diagnostic Guide
Mirror Switch Reference Voltage Positive Common Open Circuit
What does B2346 mean?
- OTHER: Mirror Switch Reference Voltage Positive Common Open Circuit Source
B2346 quick answer
B2346 is listed as “Mirror Switch Reference Voltage Positive Common Open Circuit.” It points to a possible open circuit in a shared positive reference-voltage path associated with the mirror switch; the exact interpretation depends on the vehicle.
Is B2346 generic or manufacturer-specific?
B2346 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B2346 works in the vehicle
An open circuit means electrical continuity may be interrupted, so the expected voltage may not reach part of the circuit. The code description alone does not confirm which component or connection has failed, and vehicle-specific service information is needed to interpret it.
B2346 symptoms
Depending on the vehicle and circuit, symptoms may include a mirror switch that does not respond or mirror adjustment that works intermittently. The code may also be stored without an obvious symptom.
Possible causes of B2346
Possible causes include damaged wiring, a loose or corroded connector, a faulty mirror switch, or another issue in the shared reference-voltage circuit. These are possibilities, not confirmed failures.
How to diagnose B2346
- Confirm the code and check for other stored codes using a compatible scan tool.
- Look up B2346 in service information for the specific vehicle; code definitions and test procedures can vary.
- Check whether mirror controls operate and note any intermittent behavior.
- Inspect accessible mirror-switch wiring and connectors for visible damage, looseness, or corrosion.
- Have a qualified technician test the circuit according to vehicle-specific procedures before replacing parts.
How to fix B2346
The repair depends on the test results. A technician may need to address a wiring or connector fault, or replace a component only if testing identifies it as faulty. Do not assume the mirror switch itself is the cause based on the code alone.
Can I drive with B2346?
Consider whether the mirrors provide adequate visibility. If mirror adjustment is unavailable and visibility is impaired, avoid driving until the issue is assessed or repaired. Otherwise, arrange diagnosis based on the symptoms and vehicle guidance.
B2346 frequently asked questions
What does B2346 mean?
The supplied code reference describes B2346 as “Mirror Switch Reference Voltage Positive Common Open Circuit,” indicating a possible interruption in a shared voltage path associated with the mirror switch.
Does B2346 prove the mirror switch is faulty?
No. Wiring, connectors, the switch, or another part of the circuit could be involved. Diagnosis is needed to identify the cause.
Can I drive with B2346?
That depends on whether mirror visibility is affected. If you cannot maintain adequate visibility, avoid driving until the problem is assessed.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.