Source-backed diagnostic reference

B2355 Code: Meaning & Diagnostic Guide

Passenger Mirror Horizontal / Vertical Feedback Potentiometer Circuit Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B2355 mean?

  • OTHER: Passenger Mirror Horizontal / Vertical Feedback Potentiometer Circuit Open Source

B2355 quick answer

B2355 is listed as “Passenger Mirror Horizontal / Vertical Feedback Potentiometer Circuit Open.” It indicates an open-circuit condition in the feedback circuit associated with passenger-side mirror movement; it does not by itself identify a failed part.

Is B2355 generic or manufacturer-specific?

B2355 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B2355 works in the vehicle

A feedback potentiometer is a position sensor that reports how far a mirror motor has moved. “Circuit open” means the electrical path may be interrupted or have a poor connection. The code description alone does not establish the vehicle make, the exact circuit layout, or which component is faulty.

B2355 symptoms

Depending on the vehicle and the fault, the passenger mirror may move incorrectly, fail to respond in one or both directions, or provide no obvious symptom. These possibilities are not confirmed by the code alone.

Possible causes of B2355

Possible causes include a loose, damaged, or corroded connector; damaged wiring; or a problem within the mirror’s position-sensing or motor assembly. These are possibilities, not confirmed failures.

How to diagnose B2355

  1. Confirm the code and check for related codes using a compatible scan tool.
  2. Use vehicle-specific service information to identify the circuit and expected test values; the code description alone does not specify them.
  3. With the vehicle safely parked, check the mirror connector and accessible wiring for looseness or visible damage.
  4. Have the circuit tested according to the vehicle’s wiring diagram and service procedures before replacing parts.
  5. After any repair, clear the code if appropriate and verify mirror operation and whether the code returns.

How to fix B2355

Repair any verified wiring or connector fault. Replace a mirror or related component only if testing confirms it is defective and the vehicle-specific service procedure supports that repair.

Can I drive with B2355?

If the passenger mirror cannot be adjusted or does not provide a clear view, avoid driving until visibility can be maintained safely. The code alone does not establish the vehicle’s overall safety condition.

B2355 frequently asked questions

Does B2355 confirm that the passenger mirror is faulty?

No. It identifies an open-circuit condition in the mirror feedback circuit, but diagnosis is needed to determine whether wiring, a connector, or a mirror component is responsible.

What does “feedback potentiometer circuit open” mean?

It means the electrical circuit for a sensor that reports mirror position may be interrupted or poorly connected.

Can B2355 be diagnosed without vehicle-specific information?

The code description provides a general direction, but wiring layouts and test procedures vary. Use service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.