Source-backed diagnostic reference

B2367 Code: Meaning & Diagnostic Guide

Power Sliding Door Override Switch Input Ckt Short to Gnd

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B2367 mean?

  • OTHER: Power Sliding Door Override Switch Input Ckt Short to Gnd Source

B2367 quick answer

B2367 is described as a power sliding door override switch input circuit short to ground. This indicates that the circuit’s electrical signal may be connected to ground when it should not be; the code alone does not identify a failed part.

Is B2367 generic or manufacturer-specific?

B2367 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B2367 works in the vehicle

B2367 is a body-system diagnostic trouble code. “Input circuit” refers to the electrical path that carries the override switch’s signal, and “short to ground” describes an unintended electrical connection to ground. The exact system design and diagnostic procedure can vary by vehicle.

B2367 symptoms

Depending on the vehicle, a problem in this circuit could affect how the power sliding door override switch or door system responds. The code does not establish that any particular symptom is present.

Possible causes of B2367

Possible causes include damaged wiring, a poor or contaminated connector, a switch fault, or an issue elsewhere in the circuit. These are possibilities, not confirmed causes of B2367.

How to diagnose B2367

  1. Confirm the code with a suitable scan tool and note any other codes or reported symptoms.
  2. Consult vehicle-specific service information for the circuit layout and test procedure.
  3. Have a qualified technician inspect the override switch, connectors, and accessible wiring for damage, corrosion, or loose connections.
  4. Test the circuit according to the vehicle-specific procedure before replacing any component.
  5. After repairs, clear the code and check whether it returns.

How to fix B2367

The repair depends on the results of vehicle-specific testing. A technician may need to repair wiring or connectors, or address a switch or other circuit issue. Do not replace parts based on the code alone.

Can I drive with B2367?

The code by itself does not determine whether the vehicle is safe to drive. If the sliding door does not operate or latch as intended, follow the vehicle owner’s manual and have the issue assessed promptly; avoid using a door that cannot be secured.

B2367 frequently asked questions

What does code B2367 mean?

B2367 is described as a power sliding door override switch input circuit short to ground.

Does B2367 confirm that the override switch has failed?

No. The code identifies a circuit condition, not a confirmed failed component. Wiring, connectors, the switch, or another part of the circuit may need testing.

Can I diagnose B2367 without vehicle-specific information?

A scan tool can confirm the code, but circuit layouts and test procedures vary. Use service information for the specific vehicle or consult a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.