Source-backed diagnostic reference

B2373 Code: Meaning & Diagnostic Guide

LED #1 Circuit Short to Battery

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does B2373 mean?

  • OTHER: LED #1 Circuit Short to Battery Source

B2373 quick answer

B2373 is described as “LED #1 Circuit Short to Battery.” It indicates that a control module has detected battery voltage on the LED #1 circuit where it may not be expected. The code alone does not identify the failed part or which LED is involved.

Is B2373 generic or manufacturer-specific?

B2373 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How B2373 works in the vehicle

“Short to battery” means an electrical circuit may be receiving voltage from a power source through an unintended path. B2373 is a body-system code, but the supplied reference does not identify a vehicle make, model, module, or specific LED function.

B2373 symptoms

Depending on what LED #1 controls, possible signs could include a lamp staying on, not working as expected, or a warning indicator. There may be no obvious symptom. These are possibilities, not confirmed effects of the code.

Possible causes of B2373

Possible causes include damaged wiring, a poor or contaminated connector, an electrical fault in the LED circuit, or a control-module issue. The code by itself does not confirm any of these or identify a failed component.

How to diagnose B2373

  1. Use a scan tool to confirm B2373 and note which module reports it and whether other codes are present.
  2. Check vehicle-specific service information to identify the LED #1 circuit and the conditions for setting the code.
  3. Visually inspect the relevant accessible wiring and connectors for damage, corrosion, moisture, or loose connections.
  4. Have a qualified technician test the circuit using the vehicle-specific procedure; avoid probing or repairing circuits without the appropriate instructions and equipment.
  5. After any verified fault is repaired, clear the code and check whether it returns.

How to fix B2373

Choose a repair only after testing confirms the cause. A wiring or connector repair may be appropriate if damage is found; do not replace an LED or control module based on B2373 alone. Use vehicle-specific service information or consult a qualified automotive technician.

Can I drive with B2373?

The code alone does not establish whether the vehicle is safe or unsafe to drive. If the affected light is an exterior lamp needed for visibility or signaling, or lighting is behaving unexpectedly, have it checked promptly and avoid driving when the affected function makes the vehicle difficult to see or signal safely.

B2373 frequently asked questions

What does B2373 mean?

The supplied reference describes B2373 as “LED #1 Circuit Short to Battery,” meaning the circuit may have voltage from an unintended power path.

Does B2373 identify a bad LED?

No. It reports a detected circuit condition; it does not confirm that the LED itself has failed.

Can I diagnose B2373 without vehicle-specific information?

A scan tool can confirm the code, but the circuit and test procedure depend on the vehicle and module. Use the applicable service information or a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.