B2591 Code: Meaning & Diagnostic Guide
Detent Signal Missing During Unlatch
What does B2591 mean?
- OTHER: Detent Signal Missing During Unlatch Source
B2591 quick answer
B2591 is listed as “Detent Signal Missing During Unlatch.” It indicates that a detent signal was not detected during an unlatch event; the code alone does not identify a failed part.
Is B2591 generic or manufacturer-specific?
B2591 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B2591 works in the vehicle
This is a body-system diagnostic trouble code. “Detent” refers to a position or state signal, and “unlatch” refers to a latch-release event. The supplied reference does not specify which vehicle systems or manufacturers use this definition, so confirm it against vehicle-specific service information.
B2591 symptoms
Depending on the vehicle and system, there may be a latch or release warning, an intermittent release concern, or no obvious symptom. These possibilities are not confirmed by the code description alone.
Possible causes of B2591
Possible areas to investigate include the latch-position signal, its wiring or connectors, or the control system that monitors the signal. B2591 does not confirm that any of these components has failed.
How to diagnose B2591
- Confirm the code and retrieve any related codes using a suitable scan tool.
- Check the vehicle-specific code definition and diagnostic procedure; the supplied reference does not identify manufacturer applicability.
- Note when the code sets and whether any latch or release concern is present.
- Have a qualified technician inspect the relevant signal circuit, connectors, and latch operation using the vehicle-specific procedure.
- Clear the code only after documenting it, then check whether it returns under appropriate test conditions.
How to fix B2591
Use the vehicle-specific diagnostic procedure to locate the cause before replacing parts. Repair or replace only what testing identifies; the code by itself does not establish a failed component.
Can I drive with B2591?
The code alone does not establish whether the vehicle is safe to drive. If a door or other latch will not secure or release normally, avoid relying on it and seek qualified inspection before using the vehicle.
B2591 frequently asked questions
What does B2591 mean?
The supplied reference describes it as “Detent Signal Missing During Unlatch,” meaning a detent signal was not detected during an unlatch event.
Does B2591 identify a specific failed part?
No. It describes a missing signal condition, not a confirmed component failure.
Is B2591 the same across all vehicle makes?
The supplied evidence does not establish manufacturer applicability. Check the code definition for the specific vehicle.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.