B2602 Code: Meaning & Diagnostic Guide
Missing Latch Signal During Power Sliding Door Unlatch
What does B2602 mean?
- OTHER: Missing Latch Signal During Power Sliding Door Unlatch Source
B2602 quick answer
B2602 is described as “Missing Latch Signal During Power Sliding Door Unlatch.” It indicates that a control system did not receive an expected latch-status signal during an unlatch operation; the code alone does not identify the failed part.
Is B2602 generic or manufacturer-specific?
B2602 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How B2602 works in the vehicle
This is a body-system diagnostic trouble code associated with a power sliding door. “Unlatch” means releasing the door latch, and a “latch signal” is feedback used by the system to confirm the latch’s status. Vehicle-specific service information is needed to confirm how the code applies.
B2602 symptoms
Depending on the vehicle and fault conditions, the sliding door may not unlatch or open normally, may operate intermittently, or may show a warning. These symptoms are possibilities, not guaranteed effects of B2602.
Possible causes of B2602
Possible areas to investigate include latch or position feedback, door alignment or obstruction, wiring or connectors, and the door-control system. B2602 alone does not confirm any of these as the cause.
How to diagnose B2602
- Confirm the code and note any related body-system codes and door warnings.
- Check the owner’s manual and vehicle-specific service information for the exact meaning and diagnostic procedure.
- With the vehicle parked, check for visible obstructions or signs that the sliding door is misaligned or not closing normally.
- Have a qualified technician inspect the latch feedback, connectors, wiring, and relevant control-system data using the vehicle-specific procedure.
- Clear the code only as part of diagnosis, then check whether it returns after a normal door operation.
How to fix B2602
The repair depends on test results. A qualified technician should identify the cause before replacing or adjusting parts. Do not bypass door or latch safety systems; seek professional service if the door does not latch securely.
Can I drive with B2602?
Do not assume the vehicle is safe to drive if the sliding door will not latch securely or opens unexpectedly. Follow the owner’s manual and arrange inspection; if the door cannot be secured, avoid driving until it is addressed.
B2602 frequently asked questions
Does B2602 identify a failed latch?
No. It describes a missing latch signal during a power sliding door unlatch operation, but further testing is needed to identify the cause.
Can I diagnose B2602 without vehicle-specific information?
You can note the code and check for visible obstructions, but the exact circuit and test procedure may vary by vehicle. Use its service information or consult a qualified technician.
Should I keep driving if the sliding door will not latch?
Do not drive if the door cannot be secured. Follow the owner’s manual and have the issue inspected.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.